[chirp_users] BFf8hP

[Jim Unroe]

Larry,

This is because you are using the CHIRP stable build and it does not
support the radios with 3 power levels. You must use a CHIRP stable
build which will have a BF-F8HP model selection.

Jim KC9HI

On Thu, Feb 26, 2015 at 2:20 PM, Larry Lindsay <larrylindsay0 at gmail.com> wrote:
> I am using UV 5R for the. G  U. I.   Down load is fine.    But cannot upload
> to radio I get error code.      Unsupported firmware version.   N 5 R
> 3403f8HP 1. XX
> Lost again.    Thanks for all support
> Larry. n6nev.
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com