[chirp_users] Baofeng UV-5R

Charles Albert kc6ufm at gmail.com
Fri Aug 14 17:54:21 PDT 2015


Thanks to John and Paul for their help. I can't get the daily updates to
work (I get errors from the ppa file) but I installed the latest stable
version (0.4.1) and trimmed the cable.

Now when I try to read from the radio, the LED flashes a few times I get an
error that "Radio refused to send block 0x0000".

I'm wondering if this is due to the failure of the daily update install.
>From the first  error to the end of the output of the "apt-get install
chirp-daily" command is:


dpkg: error processing archive
/var/cache/apt/archives/chirp-daily_20150814~trusty~1_amd64.deb (--unpack):
 trying to overwrite '/usr/share/chirp/locale/pl/LC_MESSAGES/CHIRP.mo',
which is also in package chirp 0.4.1-1.0~kamal~trusty
dpkg-deb: error: subprocess paste was killed by signal (Broken pipe)
Errors were encountered while processing:
 /var/cache/apt/archives/chirp-daily_20150814~trusty~1_amd64.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)


Thanks!

Take Care & 73
Charles
KC6UFM




On Fri, Aug 14, 2015 at 8:52 AM, John LaMartina <JohnLa at usa.net> wrote:

> The ‘Radio did not Respond’ message can be caused by several
> possibilities. None are serious.
> Solution can be found at *http://www.miklor.com/COM/UV_ErrorMess.php
> <http://www.miklor.com/COM/UV_ErrorMess.php>*
>
> Also, you are running an old version of CHIRP.
> It’s very possible your radio is not supported.
> Always run the Latest Daily Build.  *http://www.miklor.com/COM/UV_CHIRP.php
> <http://www.miklor.com/COM/UV_CHIRP.php>*
>
> John
>
> *- http://www.miklor.com <http://www.miklor.com>*
>
>
>
>
>
> *From:* chirp_users-bounces at intrepid.danplanet.com [mailto:
> chirp_users-bounces at intrepid.danplanet.com] *On Behalf Of *Charles Albert
> *Sent:* Thursday, August 13, 2015 11:15 PM
> *To:* chirp_users at intrepid.danplanet.com
> *Subject:* [chirp_users] Baofeng UV-5R
>
>
>
> Hello, All...
>
>
>
> I have the above radio and I'm trying to get CHIRP 0.3.1 on Linux to
> connect to the radio.
>
>
>
> I'm using an USB cable that shows up as ttyUSB0. None of the lights on the
> radio change (LED should blink, right?) and CHIRP errors that the radio is
> not responding.
>
>
>
> Any ideas where I should start looking?
>
>
>
> Take Care & 73
>
> Charles
>
> KC6UFM
>
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20150814/f25f005d/attachment-0002.html 


More information about the chirp_users mailing list