[chirp_users] Baofeng UV-5r

[Yair Tzur]

It sounds like the radio model that you have is the BF-F8HP which is the
last predecessor of the UV-5R and it has 3 power modes (1,4,8w).
Did you choosing this radio from the list and then download data from your
actual device?

On Mon, Aug 24, 2015 at 6:45 AM Marven Konzelman <ve4ke at mymts.net> wrote:

> Ok,no my radio is the 1,4,8w model and when I change it to low with the
> software that I am using it goes to 4w.  However this not much of a problem
> as I can easily change it on the radio itself....Thanks John
>
> *From:* John LaMartina <JohnLa at usa.net>
> *Sent:* Sunday, August 23, 2015 10:05 PM
> *To:* 'Discussion of CHIRP' <chirp_users at intrepid.danplanet.com>
> *Subject:* Re: [chirp_users] Baofeng UV-5r
>
>
> Marv,  Is this a standard UV5R ?
> If so, the three power level software is not compatible. It only works
> with the 1, 4, 8W radios.
> If your radio is only capable of Lo (1w) and Hi (4w), using the tri-power
> software will make no difference in performance.
>
> John
>
> - http://www.miklor.com
>
>
>
>
>
> *From:* chirp_users-bounces at intrepid.danplanet.com [mailto:
> chirp_users-bounces at intrepid.danplanet.com] *On Behalf Of *Marven
> Konzelman
> *Sent:* Sunday, August 23, 2015 10:37 PM
> *To:* chirp_users at intrepid.danplanet.com
> *Subject:* [chirp_users] Baofeng UV-5r
>
>
>
> Hi! I am a new subscriber to this list. Can anyone tell me if there is a
> daily build that works with the uv-5r, firmware Ver. NSR3409 BFP3-25 that
> will show the tree power levels. I found builds that work with my radio but
> they just show the high and low power levels.    Thanks   Marv VE4KE
>
> ------------------------------
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20150824/47d87e0f/attachment.html