[chirp_users] repeater programming on UV5R

[Jim Unroe]

On Wed, Aug 19, 2015 at 2:45 PM, Martin Goodrum <g3zqu at btinternet.com> wrote:
> I am having a problem programming a couple of my local 70cm repeaters into
> my baofang UV5R.
> The problem is that I can access the repeater but although the repeater
> responds, as indicated by the green light being lit, I hear no audio. This
> is because R-CTCss is set to on.
> These two repeaters do not transmit a CTCss tone so I need to program
> R-CTCSS off on the radio but so far I have been unsuccessful in doing this!
> Manually loading the repeater into the radio it all works fine, just using a
> memory channel programmed with Chirp. It is just two repeaters that give
> probs. all others are OK.
>
> So question is how do I program the R-CTCss off for these two memory
> channels, but leave T-CTCss active of course.
>
> Martin G3ZQU.

For menu 13 (T-CTCS) = {tone frequency} and menu 11 (R-CTCS) = OFF

Tone Mode = Tone
Tone = {tone frequency}

Jim KC9HI