[chirp_users] Baofeng UV-5R

[Neil Stone]

Looks like you still have the normal build installed too... try removing
that and install just the daily.

73

M6lpi
On 15 Aug 2015 01:55, "Charles Albert" <kc6ufm at gmail.com> wrote:

> Thanks to John and Paul for their help. I can't get the daily updates to
> work (I get errors from the ppa file) but I installed the latest stable
> version (0.4.1) and trimmed the cable.
>
> Now when I try to read from the radio, the LED flashes a few times I get
> an error that "Radio refused to send block 0x0000".
>
> I'm wondering if this is due to the failure of the daily update install.
> From the first  error to the end of the output of the "apt-get install
> chirp-daily" command is:
>
>
> dpkg: error processing archive
> /var/cache/apt/archives/chirp-daily_20150814~trusty~1_amd64.deb (--unpack):
>  trying to overwrite '/usr/share/chirp/locale/pl/LC_MESSAGES/CHIRP.mo',
> which is also in package chirp 0.4.1-1.0~kamal~trusty
> dpkg-deb: error: subprocess paste was killed by signal (Broken pipe)
> Errors were encountered while processing:
>  /var/cache/apt/archives/chirp-daily_20150814~trusty~1_amd64.deb
> E: Sub-process /usr/bin/dpkg returned an error code (1)
>
>
> Thanks!
>
> Take Care & 73
> Charles
> KC6UFM
>
>
>
>
> On Fri, Aug 14, 2015 at 8:52 AM, John LaMartina <JohnLa at usa.net> wrote:
>
>> The ‘Radio did not Respond’ message can be caused by several
>> possibilities. None are serious.
>> Solution can be found at *http://www.miklor.com/COM/UV_ErrorMess.php
>> <http://www.miklor.com/COM/UV_ErrorMess.php>*
>>
>> Also, you are running an old version of CHIRP.
>> It’s very possible your radio is not supported.
>> Always run the Latest Daily Build.  *http://www.miklor.com/COM/UV_CHIRP.php
>> <http://www.miklor.com/COM/UV_CHIRP.php>*
>>
>> John
>>
>> *- http://www.miklor.com <http://www.miklor.com>*
>>
>>
>>
>>
>>
>> *From:* chirp_users-bounces at intrepid.danplanet.com [mailto:
>> chirp_users-bounces at intrepid.danplanet.com] *On Behalf Of *Charles Albert
>> *Sent:* Thursday, August 13, 2015 11:15 PM
>> *To:* chirp_users at intrepid.danplanet.com
>> *Subject:* [chirp_users] Baofeng UV-5R
>>
>>
>>
>> Hello, All...
>>
>>
>>
>> I have the above radio and I'm trying to get CHIRP 0.3.1 on Linux to
>> connect to the radio.
>>
>>
>>
>> I'm using an USB cable that shows up as ttyUSB0. None of the lights on
>> the radio change (LED should blink, right?) and CHIRP errors that the radio
>> is not responding.
>>
>>
>>
>> Any ideas where I should start looking?
>>
>>
>>
>> Take Care & 73
>>
>> Charles
>>
>> KC6UFM
>>
>>
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>>
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20150815/d732387b/attachment.html