[chirp_users] Setting up banks/groups on Yaesu VX-3
tom at tomh.us
Wed Apr 29 12:50:32 PDT 2015
On Wed, Apr 29, 2015 at 11:14 AM, Mike Lubrecht <mlubrecht at wildblue.net> wrote:
> I’ve just successfully uploaded a set of channels and other settings to my
> Yaesu VX-3. Those work perfectly. I then used Chirp to name three banks
> and select which channels I wanted to populate those banks. When I uploaded
> again, the radio doesn’t seem to recognize them – when I use the FW and/or
> BAND key to access them, I get a “NO BNK” message.
Sounds like another example of this:
Here's what you can do:
1. Save the .img as you have it now.
2. Use the front panel on the radio to add a channel to a bank. This
should set all the enabled bits associated with the bank.
3. Download from the radio. Save the new .img with another filename.
4. Create a new bug issue and attach both img files (search first,
there might already be a bug report for this behavior on the VX3). You
can mark your new issue as related to #409 if you want. A developer
should be able to look at your two .img files and, based on your
description of which channel you added to which bank, determine what
bits need to be set.
More information about the chirp_users