[chirp_users] Baofeng UV-5R and Wouxun KG-UVD8

John Wuest ultimafi at yahoo.com
Mon Apr 20 08:33:33 PDT 2015


There is NO reason to take the antenna off. In fact, that could damage your radio.
      From: eddie broker <eddieb at me.com>
 To: "rolle at stavlind.se" <rolle at stavlind.se>; Discussion of CHIRP <chirp_users at intrepid.danplanet.com> 
 Sent: Monday, April 20, 2015 10:24 AM
 Subject: Re: [chirp_users] Baofeng UV-5R and Wouxun KG-UVD8
   
I have had same issue on several of them removing antenna and turning up volume helped still took 20 try's 


Start by doing what's necessary; then do what's possible; and suddenly you are doing the impossible.



On Apr 20, 2015, at 7:19 AM, Rolle Stavlind <rolle at stavlind.se> wrote:


Hi! As you can see on the third clip. It is even impossible to download from the radio.I have no problems with the other stations./Rolle ---
Rolle Stavlind
Ledinge Kvarnbol 444
741 90 Knivsta
Tel 018-345597 GSM 070-5219597FAX 070-6109597 
E-post rolle at stavlind.se2015-04-20 12:50 skrev John LaMartina:
The two image files are not compatible.
CHIRP supports over 80 makes and models of radio.  

You must first create an initial template for your specific model. 
This gives CHIRP a starting image of your radio and firmware. 
This is done by selecting the Radio tab in the CHIRP toolbar and perform a Download_from_Radio. 
This loads your radio's initial parameters.   You can now either Cut/Paste or Import the frequencies into your new template for the UV8D.


Johnhttp://www.miklor.com   From: chirp_users-bounces at intrepid.danplanet.com [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Rolle Stavlind POP3
Sent: Monday, April 20, 2015 1:40 AM
To: chirp_users at intrepid.danplanet.com
Subject: [chirp_users] Baofeng UV-5R and Wouxun KG-UVD8 Hi! Got problems when try to program one off my Baofeng UV-5R.See the screens dumps below.Using the daily file from 20150416. Using Baofeng software the radio works. The other UV-5R works fine both with Chirp and Baofeng software           When programing Wouxun KG-UVD8 it seems like some parameters don´t transfers to the radio.  /Rolle  <image001.png> <image002.png> <image003.png>

 Rolle Stavlind Ledinge Kvarnbol 444741 90 KnivstaTel 018-345597Mobil 070-5219597Mail rolle at stavlind.se 


_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com

_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com

  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20150420/3f97ab1d/attachment-0002.html 


More information about the chirp_users mailing list