[chirp_users] CHIRP and Icom T70A

Bry Carling bcarling at cfl.rr.com
Wed Apr 1 21:36:13 PDT 2015


I can only hope that I learned to do something useful out of all this massive amount of time I have invested!

Best regards - Brian Carling
AF4K Crystals Co.
117 Sterling Pine St.
Sanford, FL 32773

Tel: +USA 321-262-5471




> On Apr 1, 2015, at 9:57 PM, D.J.J. Ring, Jr. <n1ea at arrl.net> wrote:
> 
> If Bry finds a source of high quality cables he might start selling them along with a FREE Linux CD of CHIRP Daily Build and he'd become a Corporate Sponsor with a monthly stipend to the devels.
> 
> And cables that fit China radios, too.
> 
> 73
> 
> David
> N1EA
>> On Apr 1, 2015 9:22 PM, "David Ranch" <chirp at trinnet.net> wrote:
>> 
>> Hello Bry,
>> 
>> > This radio programmning crap is keeping so many hams off the air. I miss the days when you
>> > didn't need to program radios. They just worked, OR they were far simpler to set up
>> > memories.
>> 
>> No one said you had to program your radio via a computer.  You can just
>> use the keypad to get the same thing done.  It's just usually a LOT harder.
>> 
>> Alternatively, if you want known quality, you can buy solutions from say
>> RT Systems which include cables (those also occasionally go bad) and
>> software but if you want to take your saved settings to a new radio, you
>> have to buy THAT radio's software package.  If you have 5 different
>> radios.. that can get quite expensive in a hurry.  Chirp doesn't follow
>> that approach and one program attempts to program ALL radios but with a
>> community based effort, you must temper your complaints with how much
>> you paid for the software.  $0 = a few complaints  ;-)
>> 
>> --David
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20150402/f07c384e/attachment-0002.html 


More information about the chirp_users mailing list