[chirp_users] Homebrew cable for Baofeng UV-5R/Yaesu VX-7R based on CP2102 UART

[YT9TP Pedja]

On 28.9.2014 13:16, Mark Lewis GW7KDU wrote:
> I found this pin out for the VX-7R
> http://www.kc8unj.com/pinout.jpg
> This seems to be similar to the Baofeng UV-3R (as shown on the Miklor
> page) but is a Ground connection required?

It seems like VX-7R uses one pin for data and it is bidirectional. If 
that is the case then you should add some more components to convert 
bidirectional single pin to standard RX/TX serial connection.





---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com