[chirp_users] Programming Yaesu FT-7800

Milton thecanesvenatici at gmail.com
Sat Oct 18 15:39:03 PDT 2014


Download the manual for the radio. it should have a pinout of the data
connection. My FT-8900 is wired the same as your rig, I don't think they
have changed the pin numbers since they started using the mini DIN plug for
data. I used spare Wouxon cable and put a mini DIN plug on it to use to
program my 8900.

On Sat, Oct 18, 2014 at 4:54 PM, <ARSK0MBB at aol.com> wrote:

>  Hello All,
>
> I have a Yaesu FT-7800 radio which I program manually.  I also have a
> Baofeng UV-5RE plus with programming cable.  I run Windows 7.  I have
> successfully programmed the Baofeng and would like to know if anyone has
> used CHIRP and the UV-5RE programming cable to program the Yaesu FT-7800.
> The FT-7800 uses a PS2 type connector at the rear of the radio so I would
> have to make a custom cable interface which is no problem, I'm just puzzled
> over the connections / pinout.  Thanks & 73
> Jerry S.  R.Ph.  KØMBB
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20141018/5874bb8f/attachment-0002.html 


More information about the chirp_users mailing list