[chirp_users] Chirp Powerwerx Question

Jim Unroe rock.unroe at gmail.com
Mon Oct 13 06:27:53 PDT 2014

Thanks for the followup. The Supported Radio Models on the wiki page has
been updated.


On Mon, Oct 13, 2014 at 7:01 AM, Brian <km4cmy at yahoo.com> wrote:

>   HI Jim,
> Thanks for the information. I was able to easily program the radio with a
> RT Systems cable ( Win 8  loaded the driver automatically). I was able to
> cut/paste a program I had for a Baofeng BF-FHP, into the image for the
> Powerwerx. Once again, CHIRP worked Flawlessly !  Thanks again for the help.
> Brian
>  *From:* Jim Unroe <rock.unroe at gmail.com>
> *Sent:* Saturday, October 11, 2014 8:06 AM
> *To:* Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> *Subject:* Re: [chirp_users] Chirp Powerwerx Question
>  Brian,
> According to the driver code, it should be supported. When attempting a
> download using the CHIRP software I have installed here, Powerwerx is
> listed as a vendor and DB-750 is listed as a model. Try it and let me know
> how it goes. I will update the wiki page.
> Jim KC9HI
> On Sat, Oct 11, 2014 at 6:45 AM, Brian <Km4cmy at yahoo.com> wrote:
>>   Does Chirp support Powerwerx DB-750 ? I know it’s the same at the
>> Polmar DB50m and the AT 5888UV ? I have the programming cable , but no the
>> RT Systems software, just wondering if the AT 5888UV setting would work.
>> Thanks,
>> Brian
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20141013/c679fa5a/attachment-0002.html 

More information about the chirp_users mailing list