[chirp_users] Trouble Reading IC-92ad

[Greg Dean]

The program suggested that I upgrade.  I did.  Now I also have issues with Chirp reading my IC-92.  I have the data cable that is RS-232.  It seems to not find the right port.

 

From: chirp_users-bounces at intrepid.danplanet.com [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Jim Unroe
Sent: Monday, October 13, 2014 7:55 AM
To: Discussion of CHIRP
Subject: Re: [chirp_users] Trouble Reading IC-92ad

 

There is no reason to upgrade from v0.4.0 to v0.4.1 unless you are programming the Baofeng UV-5R or one of its many variants.

 

Jim KC9HI

 

On Mon, Oct 13, 2014 at 6:22 AM, Bryan McWhirt <bryan at kb9yen.com <mailto:bryan at kb9yen.com> > wrote:


I haven't downloaded 0.4.1 yet and I'll get around to that but I can not
get the radio to read.

OS: OS X 10.9
Radio: Icom IC-92AD
Radio Interface: RS-92(official from icom)
Serial: Prolific and FTDI both

My FTDI debug.log:
https://dl.dropboxusercontent.com/u/41984473/debug.log-ftdi
My Prolific debug.log:
https://dl.dropboxusercontent.com/u/41984473/debug.log-prolific.log

I'd appreciate any advice and or suggestions.

thanks

--
KB9YEN
Bryan McWhirt
bryan at kb9yen.com <mailto:bryan at kb9yen.com> 

_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com <mailto:chirp_users at intrepid.danplanet.com> 
http://intrepid.danplanet.com/mailman/listinfo/chirp_users

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20141013/83e760f7/attachment.html