[chirp_users] Chirp Powerwerx Question

[Brian]

HI Jim,

Thanks for the information. I was able to easily program the radio with a RT Systems cable ( Win 8  loaded the driver automatically). I was able to cut/paste a program I had for a Baofeng BF-FHP, into the image for the Powerwerx. Once again, CHIRP worked Flawlessly !  Thanks again for the help.

Brian
KM4CMY

From: Jim Unroe 
Sent: Saturday, October 11, 2014 8:06 AM
To: Discussion of CHIRP 
Subject: Re: [chirp_users] Chirp Powerwerx Question

Brian,

According to the driver code, it should be supported. When attempting a download using the CHIRP software I have installed here, Powerwerx is listed as a vendor and DB-750 is listed as a model. Try it and let me know how it goes. I will update the wiki page.


Jim KC9HI


On Sat, Oct 11, 2014 at 6:45 AM, Brian <Km4cmy at yahoo.com> wrote:

  Does Chirp support Powerwerx DB-750 ? I know it’s the same at the Polmar DB50m and the AT 5888UV ? I have the programming cable , but no the RT Systems software, just wondering if the AT 5888UV setting would work.

  Thanks,

  Brian
  KM4CMY

  _______________________________________________
  chirp_users mailing list
  chirp_users at intrepid.danplanet.com
  http://intrepid.danplanet.com/mailman/listinfo/chirp_users





--------------------------------------------------------------------------------
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20141013/cb2be252/attachment.html