[chirp_users] baofeng 82 squelch on uhf

Stan M qslstan at gmail.com
Tue Nov 11 09:15:59 PST 2014


Hi Jim
Followed your direction
Squelch 1 now = .15 Micro volt
Squelch 9 now =  .25 Micro volts

The set position on my gen is off a tad,

There must be a hidden way to adjust the sq



On Tue, Nov 11, 2014 at 10:22 AM, Stan M <qslstan at gmail.com> wrote:

> Thanks Jim
> Here is the file.
>
> Stan
> Ve4acv
>
> On Tue, Nov 11, 2014 at 4:45 AM, Jim Unroe <rock.unroe at gmail.com> wrote:
>
>> On Tue, Nov 11, 2014 at 1:15 AM, Stan M <qslstan at gmail.com> wrote:
>> > Using chirp, my squelch setting may still read setting 1
>> > but the actual setting moves from .2 micro volts to 1 micro volt
>> > making the squelch useless.  any one have any ideas
>> > why,  what I thought was in firmware is changing?
>> >
>> > When I reset the radio by the menue it resets back to default
>> > up load again, the squelch changes.  Seems to only affect the UHF side.
>>
>> I would suggest that you download the factory .img that matches your
>> firmware version from here:
>> http://kc9hi.dyndns.org/uv5r/programming/CHIRPrecovery/
>>
>> Load this .img file into CHIRP. Now import your .img file into this
>> one (File -> Import), edit the settings and then upload it into your
>> radio. Do not upload your "original" .img file.
>>
>> If you would, reply and attach your original .img file so I can study it.
>>
>> Jim KC9HI
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20141111/f4337ce6/attachment-0002.html 


More information about the chirp_users mailing list