[chirp_users] baofeng 82 squelch on uhf

Jim Unroe rock.unroe at gmail.com
Tue Nov 11 02:45:17 PST 2014


On Tue, Nov 11, 2014 at 1:15 AM, Stan M <qslstan at gmail.com> wrote:
> Using chirp, my squelch setting may still read setting 1
> but the actual setting moves from .2 micro volts to 1 micro volt
> making the squelch useless.  any one have any ideas
> why,  what I thought was in firmware is changing?
>
> When I reset the radio by the menue it resets back to default
> up load again, the squelch changes.  Seems to only affect the UHF side.

I would suggest that you download the factory .img that matches your
firmware version from here:
http://kc9hi.dyndns.org/uv5r/programming/CHIRPrecovery/

Load this .img file into CHIRP. Now import your .img file into this
one (File -> Import), edit the settings and then upload it into your
radio. Do not upload your "original" .img file.

If you would, reply and attach your original .img file so I can study it.

Jim KC9HI



More information about the chirp_users mailing list