[chirp_users] Trying to use chirp via ser2net and socat

Nigel Johnson, MIEEE nw.johnson at ieee.org
Wed Nov 5 15:27:53 PST 2014


Hmmm, I am not seeing my characters come back if I telnet to it.  Seems like I will have to take laptop up to boiler room and see if chirp will talk directly.

Thanks es 73
Nigel ve3id


On 11/05/2014 05:33 PM, Tom Hayward wrote:
> On Wed, Nov 5, 2014 at 1:37 PM, Andrew <ziltro at ziltro.com> wrote:
>> What you could do is to unplug the cable from the radio and connect the
>> TX and RX pins together. (I don't know what the cable is so I don't know
>> which pins this or how easy it would be to do.)
>>
>> Once you do that any data you manage to send to the serial port will
>> come straight back again, so you can test that the link is working, and
>> it works at any baud rate.
>
> The Yaesu cable does this internally, so no modification necessary.
>
> Tom KD7LXL
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>

  

-- 
Nigel Johnson
MSc., MIEEE
VE3ID/G4AJQ/VA3MCU

Amateur Radio, the origin of the open-source concept!

http://nigel.homelinux.net
http://va3mcu.ham-radio-op.net

You can reach me by voice on Skype:  TILBURY2591

If time travel ever will be possible, it already is. Ask me again yesterday

This e-mail is not and cannot, by its nature, be confidential. En route from me to you, it will pass across the public Internet, easily readable by any number of system administrators along the way.
    Nigel Johnson <nw.johnson at ieee.org>

     
Please consider the environment when deciding if you really need to print this message






More information about the chirp_users mailing list