[chirp_users] BaoFeng UV-82C

Jim Unroe rock.unroe at gmail.com
Tue Nov 4 15:03:50 PST 2014


Hi Richard,

CHIRP programs quite a few different radios with different
requirements and options. You can't just start out with File -> New
and start programming. CHIRP won't know what the requirements and
options are.

What you must do is download from the radio first. Use the UV-82
selection. Without making any changes, save this first download to a
.img file for backup purposes. Keep it in a safe place.

Now you can edit the memory channels and settings as needed and then
upload them to the radio. When you save these changes to a .img file,
be sure to use a different file name than you did for your "backup".

Also, so as not to lose the effort that you put into the "generic"
template, you can save it as a .csv file and then import it to your
UV-82 template. An alternative would be to load both at the same time
and copy and paste the channels from the "generic" tab to the the
UV-82 tab.

Jim KC9HI

On Tue, Nov 4, 2014 at 5:25 PM, Richard Dillman <ddillman at igc.org> wrote:
>
> I'm trying to program a BF UV-82C for a friend.  I note that compatibility for this radio is available in daily builds.  I'm using Chirp daily - 20141025 which I think is the latest, but the UV-82C does not seem to appear in the list of compatible radios.  Using UV-82 I can program the frequencies but not the special settings.  I bet I'm missing something obvious but so far it's escaping me so I come to the brain trust for guidance.
>
> RD
>
> =================================
> Richard Dillman, T2-GB-061170
> Chief Operator, Coast Station KSM
> Maritime Radio Historical Society
> http://www.radiomarine.org
> =================================



More information about the chirp_users mailing list