[chirp_users] Radio did not ack programming mode with UV-B5

[Richard Hum]

John,

I've read that article, and it didn't help. I inspected the connection and
it should be inserted correctly. The stock software is able to program it
correctly, so I suspect it is a software issue. That is why I did the
serial port capture.

Richard
On 17 Nov 2014 10:11, "John LaMartina ☀" <JohnLa at usa.net> wrote:

> Richard,
> Let me refer you to http://www.miklor.com/COM/UV_ErrorMess.php
> I believe that error message may be covered there.
>
> John
> Http://www.miklor.com
>
>
>
> On Nov 17, 2014, at 9:46 AM, Richard Hum <hum.richard at gmail.com> wrote:
>
> When I try to do "Download from radio" on my UV-B5 with chirp, I get a
> "Radio did not ack programming mode" error. I did some googling, but all
> the tips did not help.
>
> I discovered that using the programming software version 1.09 on Miklor
> did work, so it probably isn't a driver or cable issue. I have driver
> version 3.2.0.0.
>
> I get the error on both Linux and Windows 7.
>
> In Windows, I did some serial port captures to compare the traffic from
> the stock software and chirp. Below are those files generated by Serial
> Port Monitor by Eltima. The HTML files are exported versions so someone
> without the software could read the output.
>
> Here is a dropbox link to the files:
> https://www.dropbox.com/sh/hoj7428g4gnjq9x/AAAl8bjPi0vgNKWVm7w0hgyza?dl=0
>
>
> Best Regards,
> Richard
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20141117/ed251af2/attachment.html