[chirp_users] baofeng 82 squelch on uhf

[Stan M]

The reason I say this is with my previous error, the setting of Squelch
on 9 went up to 15 micro volts.  1 setting  became 1 micro volt.
Now it is too low of a variance. 1 - 9


On Tue, Nov 11, 2014 at 11:15 AM, Stan M <qslstan at gmail.com> wrote:

> Hi Jim
> Followed your direction
> Squelch 1 now = .15 Micro volt
> Squelch 9 now =  .25 Micro volts
>
> The set position on my gen is off a tad,
>
> There must be a hidden way to adjust the sq
>
>
>
> On Tue, Nov 11, 2014 at 10:22 AM, Stan M <qslstan at gmail.com> wrote:
>
>> Thanks Jim
>> Here is the file.
>>
>> Stan
>> Ve4acv
>>
>> On Tue, Nov 11, 2014 at 4:45 AM, Jim Unroe <rock.unroe at gmail.com> wrote:
>>
>>> On Tue, Nov 11, 2014 at 1:15 AM, Stan M <qslstan at gmail.com> wrote:
>>> > Using chirp, my squelch setting may still read setting 1
>>> > but the actual setting moves from .2 micro volts to 1 micro volt
>>> > making the squelch useless.  any one have any ideas
>>> > why,  what I thought was in firmware is changing?
>>> >
>>> > When I reset the radio by the menue it resets back to default
>>> > up load again, the squelch changes.  Seems to only affect the UHF side.
>>>
>>> I would suggest that you download the factory .img that matches your
>>> firmware version from here:
>>> http://kc9hi.dyndns.org/uv5r/programming/CHIRPrecovery/
>>>
>>> Load this .img file into CHIRP. Now import your .img file into this
>>> one (File -> Import), edit the settings and then upload it into your
>>> radio. Do not upload your "original" .img file.
>>>
>>> If you would, reply and attach your original .img file so I can study it.
>>>
>>> Jim KC9HI
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users at intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20141111/474d6068/attachment.html