[chirp_users] baofeng 82 squelch on uhf

[Stan M]

Thanks Jim
Here is the file.

Stan
Ve4acv

On Tue, Nov 11, 2014 at 4:45 AM, Jim Unroe <rock.unroe at gmail.com> wrote:

> On Tue, Nov 11, 2014 at 1:15 AM, Stan M <qslstan at gmail.com> wrote:
> > Using chirp, my squelch setting may still read setting 1
> > but the actual setting moves from .2 micro volts to 1 micro volt
> > making the squelch useless.  any one have any ideas
> > why,  what I thought was in firmware is changing?
> >
> > When I reset the radio by the menue it resets back to default
> > up load again, the squelch changes.  Seems to only affect the UHF side.
>
> I would suggest that you download the factory .img that matches your
> firmware version from here:
> http://kc9hi.dyndns.org/uv5r/programming/CHIRPrecovery/
>
> Load this .img file into CHIRP. Now import your .img file into this
> one (File -> Import), edit the settings and then upload it into your
> radio. Do not upload your "original" .img file.
>
> If you would, reply and attach your original .img file so I can study it.
>
> Jim KC9HI
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20141111/af25e497/attachment.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: baofeng 82L.img
Type: application/octet-stream
Size: 6472 bytes
Desc: not available
Url : http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20141111/af25e497/attachment.img