[chirp_users] Help in programming a uv-5

Jim Unroe rock.unroe at gmail.com
Thu May 15 13:26:58 PDT 2014


Clif,

You must download from the radio first to get a tab that shows "Baofeng
UV-5R:" in it. Then you can edit that and upload it to your radio. If you
have already programmed channels on a generic tap, load it too. Then you
can copy and paste from the generic tab to the Baofeng UV-5R: tab. Only
tabs prefixed with "Baofeng UV-5R:" will be allowed to be uploaded to your
radio.

Jim KC9HI


On Thu, May 15, 2014 at 4:04 PM, Clif Wright <wretsub at gmail.com> wrote:

> I have an uv-5r and unable to program.  When I use Chirp I see the
> program, but the upload to radio is greyed out.
>
> I have windows 7 and have all the current updates.  the cable is black and
> I have tried to load all drivers.
>
> Any guidance would be helpful as I need to program about 15 radios
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140515/a4477038/attachment-0002.html 


More information about the chirp_users mailing list