[chirp_users] chirp_users Digest, Vol 65, Issue 9

Garth Hoyman gchoyman at gmail.com
Thu May 15 12:13:32 PDT 2014


#4 message
the procedure for replying to a specific message is unclear?
hope this works...

mageia 4 64bit
KDE Desktop environment
Chromium browser


when I tried to install from the link on the wiki
http://d-rats.com/yum/f11/d-rats-repo-0.1.2-1.fc11.noarch.rpm
with software installer, the procedure starts, asks me if I'm sure
& then nothing

this link works
http://dl.fedoraproject.org/pub/fedora/linux/updates/20/i386/chirp-0.4.0-1.fc20.noarch.rpm

which would mean fedora keeps an updated version in their repository I
think...
I don't see the working link of the wiki page

Mageia being downstream of RedHat>Fedora
there would be no real need to get the mageia devs to bring chirp onboard
at least until I could actually try to use it some
I haven't been able to get it working as yet, nor the UV-5Rs I intend to
use.  I just need basic 2 way communication on my ranch.

I'll be happy to get any answers you request from mageia

I don't understand
"Also the rpm package you linked contains a yum repo definition, not an
application."
Beyond use the link that works

thanks for your hard work








On Wed, May 14, 2014 at 12:00 PM, <
chirp_users-request at intrepid.danplanet.com> wrote:

> Send chirp_users mailing list submissions to
>         chirp_users at intrepid.danplanet.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
>         http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> or, via email, send a message with subject or body 'help' to
>         chirp_users-request at intrepid.danplanet.com
>
> You can reach the person managing the list at
>         chirp_users-owner at intrepid.danplanet.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of chirp_users digest..."
>
>
> Today's Topics:
>
>    1. Re: Adding frequencies outside of band plan (Rob Cartier)
>    2. Re: Adding frequencies outside of band plan (Milton)
>    3. Re: Adding frequencies outside of band plan (Jens J.)
>    4. Re: Installing Chirp on Mageia Linux (David Ranch)
>    5. Fwd: Adding frequencies outside of band plan (Rob Cartier)
>    6. Re: Adding frequencies outside of band plan (Milton)
>    7. Baofeng UV-82 Offset (Adam Brady)
>    8. Re: Baofeng UV-82 Offset (John LaMartina)
>    9. Re: Baofeng UV-82 Offset (John LaMartina)
>   10. Re: Baofeng UV-82 Offset (Adam Brady)
>   11. Programing a Baofeng UV-82 with Chirp on osx 10.9.2
>       (Christian Schwarz)
>   12. Re: Baofeng UV-82 Offset (Jim Unroe)
>   13. Re: Baofeng UV-82 Offset (Christian Schwarz)
>   14. Re: Baofeng UV-82 Offset (Adam Brady)
>   15. Re: Programing a Baofeng UV-82 with Chirp on osx  10.9.2
>       (Marthijn Soesbergen)
>   16. Re: Baofeng UV-82 Offset (MCH)
>   17. Re: Programing a Baofeng UV-82 with Chirp on osx  10.9.2
>       (Christian Schwarz)
>   18. Re: Programing a Baofeng UV-82 with Chirp on      osx     10.9.2
> (Jens J.)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 13 May 2014 15:11:28 -0400
> From: Rob Cartier <rob.cartier at gmail.com>
> Subject: Re: [chirp_users] Adding frequencies outside of band plan
> To: chirp_users at intrepid.danplanet.com
> Message-ID:
>         <CAEcb2yJGConX+ymQ8iChsa_9HUdONp2+Kf+=
> sPDNhEhYnjr3ZQ at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> I have a Kenwood TM-241 that is able to handle frequencies that are able to
> be resolved correctly in the Kenwood MCP-1A programmer however chirp
> complains
> about the band and steps
>
> the frequency is 15x.5625.
>
> Is there a workaround to disable the test and enter the frequency
>
> Thanks
>
>
> Rob - kd1jg
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140513/cffe492b/attachment-0001.html
>
> ------------------------------
>
> Message: 2
> Date: Tue, 13 May 2014 17:32:40 -0400
> From: Milton <thecanesvenatici at gmail.com>
> Subject: Re: [chirp_users] Adding frequencies outside of band plan
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
>         <
> CAChAUongbHgc3fxTtfbHRJuNm9OzX9fuaq6CEswWaUQmTjbD9g at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> I think the step would be 12.5 khz. And the USA version of the 241 stops at
> 148 mhz.
>
>
> On Tue, May 13, 2014 at 3:11 PM, Rob Cartier <rob.cartier at gmail.com>
> wrote:
>
> >
> > I have a Kenwood TM-241 that is able to handle frequencies that are able
> > to
> > be resolved correctly in the Kenwood MCP-1A programmer however chirp
> > complains
> > about the band and steps
> >
> > the frequency is 15x.5625.
> >
> > Is there a workaround to disable the test and enter the frequency
> >
> > Thanks
> >
> >
> > Rob - kd1jg
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140513/dd8e3c28/attachment-0001.html
>
> ------------------------------
>
> Message: 3
> Date: Tue, 13 May 2014 14:53:31 -0700 (PDT)
> From: "Jens J." <kd4tjx at yahoo.com>
> Subject: Re: [chirp_users] Adding frequencies outside of band plan
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
>         <1400018011.64372.YahooMailNeo at web125306.mail.ne1.yahoo.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> TM-241A isnt supported by chirp - and I dont even think it supports
> programming - it's only 20 channels.
> Perhaps you meant TM-271A ?
>
>
>
>
> ________________________________
>  From: Milton <thecanesvenatici at gmail.com>
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Sent: Tuesday, May 13, 2014 4:32 PM
> Subject: Re: [chirp_users] Adding frequencies outside of band plan
>
>
>
> I think the step would be 12.5 khz. And the USA version of the 241 stops
> at 148 mhz.
>
>
>
>
> On Tue, May 13, 2014 at 3:11 PM, Rob Cartier <rob.cartier at gmail.com>
> wrote:
>
>
> >
> >I have a Kenwood?TM-241 that is able to handle frequencies that are able
> to?
> >be resolved correctly in the Kenwood MCP-1A?programmer however chirp
> complains?
> >about the band and steps
> >
> >
> >the frequency is 15x.5625.
> >
> >
> >Is there a workaround to disable the test and enter the frequency
> >
> >
> >Thanks
> >
> >
> >
> >Rob - kd1jg
> >_______________________________________________
> >chirp_users mailing list
> >chirp_users at intrepid.danplanet.com
> >http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >
> >
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140513/fd827a44/attachment-0001.html
>
> ------------------------------
>
> Message: 4
> Date: Tue, 13 May 2014 16:52:50 -0700
> From: David Ranch <chirp at trinnet.net>
> Subject: Re: [chirp_users] Installing Chirp on Mageia Linux
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID: <5372B052.60501 at trinnet.net>
> Content-Type: text/plain; charset="iso-8859-1"
>
>
> Hello Garth,
>
> Though the second comment got you to explicitly install Chirp, your
> original post was about getting your distribution to track the Chirp
> *repository* for FUTURE releases.  When you downloaded tried to install
> that Repo RPM, what did it say?  What program did you use to try
> installing that Repo RPM?
>
> --David
>
>
> On 05/13/2014 09:20 AM, Garth Hoyman wrote:
> > Mageia Linux is an community based system, using RPM packages similar
> > to Fedora
> > Quite a bit more user friendly & good long term stability
> >
> > I was having trouble installing chirp
> > the methods described weren't working,
> > I posted a thread
> > https://forums.mageia.org/en/viewtopic.php?f=7&t=7508&p=47820#p47820
> >
> > probably the wiki could be updated?
>
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140513/26082872/attachment-0001.html
>
> ------------------------------
>
> Message: 5
> Date: Tue, 13 May 2014 20:12:01 -0400
> From: Rob Cartier <rob.cartier at gmail.com>
> Subject: [chirp_users] Fwd: Adding frequencies outside of band plan
> To: chirp_users at intrepid.danplanet.com
> Message-ID:
>         <CAEcb2yJoA-P+VHwasB1i=PwOK=B=
> 3cK9F2VeRXuA5gWbVSaYwA at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Updated: Corrected Model Number
>
>
> I have a Kenwood TM-271 that is able to handle frequencies that are able to
> be resolved correctly in the Kenwood MCP-1A programmer however chirp
> complains
> about the band and steps
>
> the frequency is 15x.5625.
>
> Is there a workaround to disable the test and enter the frequency
>
> Thanks
>
>
> Rob - kd1jg
>
>
>
> --
>
> ----------------------------------
> Rob Cartier
>
> Profile:
> http://www.google.com/profiles/rob.cartier
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140513/87c3d924/attachment-0001.html
>
> ------------------------------
>
> Message: 6
> Date: Tue, 13 May 2014 22:32:19 -0400
> From: Milton <thecanesvenatici at gmail.com>
> Subject: Re: [chirp_users] Adding frequencies outside of band plan
> To: "Jens J." <kd4tjx at yahoo.com>,       Discussion of CHIRP
>         <chirp_users at intrepid.danplanet.com>
> Message-ID:
>         <
> CAChAUokuVQyYMUi2KW2rO1HpEU88LEcvymx6mVuS-bzWtNwYjA at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Well the USA version of the the 271A has 2.5 khz steps but still only tunes
> to 148. I was just perusing
> through the owner's manual.
>
>
> On Tue, May 13, 2014 at 5:53 PM, Jens J. <kd4tjx at yahoo.com> wrote:
>
> > TM-241A isnt supported by chirp - and I dont even think it supports
> > programming - it's only 20 channels.
> > Perhaps you meant TM-271A ?
> >
> >
> >
> >   ------------------------------
> >  *From:* Milton <thecanesvenatici at gmail.com>
> > *To:* Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> > *Sent:* Tuesday, May 13, 2014 4:32 PM
> > *Subject:* Re: [chirp_users] Adding frequencies outside of band plan
> >
> > I think the step would be 12.5 khz. And the USA version of the 241 stops
> > at 148 mhz.
> >
> >
> > On Tue, May 13, 2014 at 3:11 PM, Rob Cartier <rob.cartier at gmail.com
> >wrote:
> >
> >
> > I have a Kenwood TM-241 that is able to handle frequencies that are able
> > to
> > be resolved correctly in the Kenwood MCP-1A programmer however chirp
> > complains
> > about the band and steps
> >
> > the frequency is 15x.5625.
> >
> > Is there a workaround to disable the test and enter the frequency
> >
> > Thanks
> >
> >
> > Rob - kd1jg
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >
> >
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >
> >
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140513/275cf748/attachment-0001.html
>
> ------------------------------
>
> Message: 7
> Date: Wed, 14 May 2014 13:04:46 +0000
> From: Adam Brady <adamtbrady at cassiausa.com>
> Subject: [chirp_users] Baofeng UV-82 Offset
> To: "chirp_users at intrepid.danplanet.com"
>         <chirp_users at intrepid.danplanet.com>
> Message-ID:
>         <307138238c5b48ff88e31b5294ac81a2 at MBX02A-IAD3.mex06.mlsrvr.com>
> Content-Type: text/plain; charset="us-ascii"
>
> Hello and thank you to all who have given their experience here.  The
> issue I am having is that on my CHIRP I have the OFFSET at .600, and the
> DUPLEX either a + or -.  However when I upload this to my radio it does not
> take the settings.  My radio reads OFFSET 00.000 and DUPLEX "none".  I just
> finished uninstalling, and reinstalling, CHIRP.  When I did my initial
> upload from the radio the settings in CHIRP show the correct OFFSET and
> DUPLEX in the radio.  I tried to find this already reported, but did not.
>
>
> Adam T. Brady
> Cassia Engineered Products Corp.
> 1013 North Parsons Ave.
> Brandon FL 33510
> Online: CASSIAUSA.COM<http://www.cassiausa.com/>
> E-mail : adamtbrady at cassiausa.com<mailto:adamtbrady at cassiausa.com>
> Office (813) 643 9696
> Cell      (813) 967 3925
>
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140514/37a37c9c/attachment-0001.html
>
> ------------------------------
>
> Message: 8
> Date: Wed, 14 May 2014 10:01:50 -0400
> From: John LaMartina <JohnLa at usa.net>
> Subject: Re: [chirp_users] Baofeng UV-82 Offset
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID: <465C4060-51F2-4357-8B4D-B219C04C6116 at usa.net>
> Content-Type: text/plain; charset="utf-8"
>
> Before uploading to CHIRP you must create an initial template by doing a
> Download From Radio.
> CHIRP supports over 60 model radios and needs to know which radio it is
> programming.
> Make updates to the template and Upload To Radio.
>
> This can be found at http://www.miklor.com/UV5R
> In the software section.
>
> I hope this helps.
>
> John
> http://www.miklor.com
>
>
> Sent via iPhone6
>
> > On May 14, 2014, at 9:04 AM, Adam Brady <adamtbrady at cassiausa.com>
> wrote:
> >
> > Hello and thank you to all who have given their experience here.  The
> issue I am having is that on my CHIRP I have the OFFSET at .600, and the
> DUPLEX either a + or -.  However when I upload this to my radio it does not
> take the settings.  My radio reads OFFSET 00.000 and DUPLEX ?none?.  I just
> finished uninstalling, and reinstalling, CHIRP.  When I did my initial
> upload from the radio the settings in CHIRP show the correct OFFSET and
> DUPLEX in the radio.  I tried to find this already reported, but did not.
> >
> >
> > Adam T. Brady
> > Cassia Engineered Products Corp.
> > 1013 North Parsons Ave.
> > Brandon FL 33510
> > Online: CASSIAUSA.COM
> > E-mail : adamtbrady at cassiausa.com
> > Office (813) 643 9696
> > Cell      (813) 967 3925
> >
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140514/d4eacb70/attachment-0001.html
>
> ------------------------------
>
> Message: 9
> Date: Wed, 14 May 2014 10:03:12 -0400
> From: John LaMartina <JohnLa at usa.net>
> Subject: Re: [chirp_users] Baofeng UV-82 Offset
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID: <DFBBEE4C-F827-46CF-A852-46CA57A34265 at usa.net>
> Content-Type: text/plain; charset="utf-8"
>
> Link correction...
> http://www.miklor.com/UV82
>
> Sent via iPhone6
>
> > On May 14, 2014, at 9:04 AM, Adam Brady <adamtbrady at cassiausa.com>
> wrote:
> >
> > Hello and thank you to all who have given their experience here.  The
> issue I am having is that on my CHIRP I have the OFFSET at .600, and the
> DUPLEX either a + or -.  However when I upload this to my radio it does not
> take the settings.  My radio reads OFFSET 00.000 and DUPLEX ?none?.  I just
> finished uninstalling, and reinstalling, CHIRP.  When I did my initial
> upload from the radio the settings in CHIRP show the correct OFFSET and
> DUPLEX in the radio.  I tried to find this already reported, but did not.
> >
> >
> > Adam T. Brady
> > Cassia Engineered Products Corp.
> > 1013 North Parsons Ave.
> > Brandon FL 33510
> > Online: CASSIAUSA.COM
> > E-mail : adamtbrady at cassiausa.com
> > Office (813) 643 9696
> > Cell      (813) 967 3925
> >
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140514/3a8ec95b/attachment-0001.html
>
> ------------------------------
>
> Message: 10
> Date: Wed, 14 May 2014 14:56:54 +0000
> From: Adam Brady <adamtbrady at cassiausa.com>
> Subject: Re: [chirp_users] Baofeng UV-82 Offset
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
>         <fc571c28861349599ab2af04021f50e4 at MBX02A-IAD3.mex06.mlsrvr.com>
> Content-Type: text/plain; charset="utf-8"
>
> I reset the radio and uploaded it fresh.  Then I entered the information
> into CHIRP and downloaded it.  It still will not accept the fields.
>
> From: chirp_users-bounces at intrepid.danplanet.com [mailto:
> chirp_users-bounces at intrepid.danplanet.com] On Behalf Of John LaMartina
> Sent: Wednesday, May 14, 2014 10:03 AM
> To: Discussion of CHIRP
> Subject: Re: [chirp_users] Baofeng UV-82 Offset
>
> Link correction...
> http://www.miklor.com/UV82
>
> Sent via iPhone6
>
> On May 14, 2014, at 9:04 AM, Adam Brady <adamtbrady at cassiausa.com<mailto:
> adamtbrady at cassiausa.com>> wrote:
> Hello and thank you to all who have given their experience here.  The
> issue I am having is that on my CHIRP I have the OFFSET at .600, and the
> DUPLEX either a + or -.  However when I upload this to my radio it does not
> take the settings.  My radio reads OFFSET 00.000 and DUPLEX ?none?.  I just
> finished uninstalling, and reinstalling, CHIRP.  When I did my initial
> upload from the radio the settings in CHIRP show the correct OFFSET and
> DUPLEX in the radio.  I tried to find this already reported, but did not.
>
>
> Adam T. Brady
> Cassia Engineered Products Corp.
> 1013 North Parsons Ave.
> Brandon FL 33510
> Online: CASSIAUSA.COM<http://www.cassiausa.com/>
> E-mail : adamtbrady at cassiausa.com<mailto:adamtbrady at cassiausa.com>
> Office (813) 643 9696
> Cell      (813) 967 3925
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com<mailto:
> chirp_users at intrepid.danplanet.com>
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140514/8a03ede1/attachment-0001.html
>
> ------------------------------
>
> Message: 11
> Date: Wed, 14 May 2014 17:01:55 +0200
> From: Christian Schwarz <coffeeisallineed at gmail.com>
> Subject: [chirp_users] Programing a Baofeng UV-82 with Chirp on osx
>         10.9.2
> To: chirp_users at intrepid.danplanet.com
> Message-ID: <7D65BB97-3298-4A17-AD1E-E08596B3F9E0 at gmail.com>
> Content-Type: text/plain; charset="windows-1252"
>
> Hi everybody,
>
> I?d like to know, if anybody managed to program the UV-82 using chirp (or
> the daily build 20140428) on osx 10.9.2. I read that one might or might not
> have to disable apple?s own driver for FTDI chipset. I?ve been googleing
> the topic for a few days now and have not found a way to make it work on my
> mbp. The system report will tell me that a USB-Serial Controller is there:
>
> USB-Serial Controller:
>
>   Product ID:   0x2303
>   Vendor ID:    0x067b  (Prolific Technology, Inc.)
>   Version:       3.00
>   Speed:        Up to 12 Mb/sec
>   Manufacturer: Prolific Technology Inc.
>   Location ID:  0xfa130000 / 6
>   Current Available (mA):       500
>   Current Required (mA):        100
>
> When I try to "download from radio? I have four choices in a dropdown
> menu, each of which will give me an error message:
>
> - /dev/cu.Bluetooth-Incoming-Port                       error: An error
> has occurred - Radio did not respond
> - /dev/cu.Bluetooth-Modem                               error: An error
> has occurred - could not open port /dev/cu.Bluetooth-Modem: [Errno 16]
> Resource busy:   '/dev/cu.Bluetooth-Modem'
> - /dev/cu.NoZAP-PL2303-000013FA         error: Radio did not respond
> - /dev/cu.usbserial                                             error:
> Radio did not respond
>
> Any ideas? I am using the USB programming cable from Baofeng, that came
> with the radio.
>
> btw. under windows7 (installed on the mbp) it works like a charm.
>
> Cheers,
> Chris
>
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140514/23d747d5/attachment-0001.html
>
> ------------------------------
>
> Message: 12
> Date: Wed, 14 May 2014 11:08:22 -0400
> From: Jim Unroe <rock.unroe at gmail.com>
> Subject: Re: [chirp_users] Baofeng UV-82 Offset
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
>         <
> CADnO8U6wi0RtJPCo8LxpYnNSegRdRen6G6eZMGBEZz_9S3DU7w at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Adam,
>
> Both CHIRP and your radio are working correctly.
>
> Menu 25 (SFT-D) and menu 26 (OFFSET) only have any meaning in VFO mode.
> They unnecessary in MR (channel) mode because the UV-5R and its variants
> (including the UV-82) does not use them in this mode. Instead, memory
> channels store both the direct RX and TX frequencies.
>
> Visist the UV-82 home page on the miklor.com website and look for "Menu
> Definitions - Detailed" to get a copy of the "Reference for UV-82 Menus".
> It explains the menus and shows when they are or are not active.
>
> http://www.miklor.com/UV82/
>
> CHIRP lets you enter memories into the spreadsheet editor using the shift
> direction and offset, but it actually does the math in the background and
> sends the required RX and TX frequencies to the radio.
>
> To verify all is working as it should, select a display (A or B) in MR mode
> that has its Memory Display Format set to FREQuency (menu 21 or menu 22)
> and then select a channel that has been programmed for a repeater. The
> currently selected display should be showing the RX frequency. Now tap the
> [*SCAN] key to put the radio into "reverse" mode.. An "R" should appear in
> the upper status display and the any display with its MDF set to FREQ
> should be showing the programmed TX frequency. Tap the [*SCAN] key again to
> exit "reverse" mode.
>
> In MR mode the "+-" symbol is displayed to indicate that the RX and TX
> frequencies are different. This would be true for a repeater channel with
> standard offset, a split channel with an odd offset, a cross-band channel
> or TX inhibited channel. A separate "+" or "-" indication is only available
> in VFO mode when menu 25 and menu 26 are valid.
>
> Jim KC9HI
>
>
>
> On Wed, May 14, 2014 at 9:04 AM, Adam Brady <adamtbrady at cassiausa.com
> >wrote:
>
> >  Hello and thank you to all who have given their experience here.  The
> > issue I am having is that on my CHIRP I have the OFFSET at .600, and the
> > DUPLEX either a + or -.  However when I upload this to my radio it does
> not
> > take the settings.  My radio reads OFFSET 00.000 and DUPLEX ?none?.  I
> just
> > finished uninstalling, and reinstalling, CHIRP.  When I did my initial
> > upload from the radio the settings in CHIRP show the correct OFFSET and
> > DUPLEX in the radio.  I tried to find this already reported, but did not.
> >
> >
> >
> >
> >
> > *Adam T. Brady *
> >
> > Cassia Engineered Products Corp.
> >
> > 1013 North Parsons Ave.
> >
> > Brandon FL 33510
> >
> > Online: *CASSIAUSA.COM <http://www.cassiausa.com/>*
> >
> > E-mail : adamtbrady at cassiausa.com
> >
> > Office (813) 643 9696
> >
> > Cell      (813) 967 3925
> >
> >
> >
> >
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140514/a9e5e8c9/attachment-0001.html
>
> ------------------------------
>
> Message: 13
> Date: Wed, 14 May 2014 17:11:15 +0200
> From: Christian Schwarz <coffeeisallineed at gmail.com>
> Subject: Re: [chirp_users] Baofeng UV-82 Offset
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID: <0086355A-9E75-4260-AC54-49495699D7DA at gmail.com>
> Content-Type: text/plain; charset="windows-1252"
>
> Hi,
>
> have you tried transmitting on a channel that is supposed to have an
> offset? When I look at the menu setting #26 of the uv-82 I see the same
> value that you do, 00.000. However when I transmit on a channel of which I
> know I have put an offset using Chrip, I can see that the radio switches to
> the adjusted offset-frequency. In channel mode you can adjust (menu# 21 &
> 22) whether you want to the the channel name, channel# or frequency. When
> on frequency one can see the switch.
>
> Cheers,
> Chris
>
> On May 14, 2014, at 4:56 PM, Adam Brady <adamtbrady at cassiausa.com> wrote:
>
> > I reset the radio and uploaded it fresh.  Then I entered the information
> into CHIRP and downloaded it.  It still will not accept the fields.
> >
> > From: chirp_users-bounces at intrepid.danplanet.com [mailto:
> chirp_users-bounces at intrepid.danplanet.com] On Behalf Of John LaMartina
> > Sent: Wednesday, May 14, 2014 10:03 AM
> > To: Discussion of CHIRP
> > Subject: Re: [chirp_users] Baofeng UV-82 Offset
> >
> > Link correction...
> > http://www.miklor.com/UV82
> >
> > Sent via iPhone6
> >
> > On May 14, 2014, at 9:04 AM, Adam Brady <adamtbrady at cassiausa.com>
> wrote:
> >
> > Hello and thank you to all who have given their experience here.  The
> issue I am having is that on my CHIRP I have the OFFSET at .600, and the
> DUPLEX either a + or -.  However when I upload this to my radio it does not
> take the settings.  My radio reads OFFSET 00.000 and DUPLEX ?none?.  I just
> finished uninstalling, and reinstalling, CHIRP.  When I did my initial
> upload from the radio the settings in CHIRP show the correct OFFSET and
> DUPLEX in the radio.  I tried to find this already reported, but did not.
> >
> >
> > Adam T. Brady
> > Cassia Engineered Products Corp.
> > 1013 North Parsons Ave.
> > Brandon FL 33510
> > Online: CASSIAUSA.COM
> > E-mail : adamtbrady at cassiausa.com
> > Office (813) 643 9696
> > Cell      (813) 967 3925
> >
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140514/9b90b030/attachment-0001.html
>
> ------------------------------
>
> Message: 14
> Date: Wed, 14 May 2014 15:16:46 +0000
> From: Adam Brady <adamtbrady at cassiausa.com>
> Subject: Re: [chirp_users] Baofeng UV-82 Offset
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
>         <eeb56b5736784d4781fd8df4c92b6358 at MBX02A-IAD3.mex06.mlsrvr.com>
> Content-Type: text/plain; charset="utf-8"
>
> I was wondering if that was an issue.  It seems that I can see an Rx
> signal but not hear it with MR, but if I switch to VFO and put it in
> manually I do hear it.
>
> From: chirp_users-bounces at intrepid.danplanet.com [mailto:
> chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Jim Unroe
> Sent: Wednesday, May 14, 2014 11:08 AM
> To: Discussion of CHIRP
> Subject: Re: [chirp_users] Baofeng UV-82 Offset
>
> Adam,
>
> Both CHIRP and your radio are working correctly.
>
> Menu 25 (SFT-D) and menu 26 (OFFSET) only have any meaning in VFO mode.
> They unnecessary in MR (channel) mode because the UV-5R and its variants
> (including the UV-82) does not use them in this mode. Instead, memory
> channels store both the direct RX and TX frequencies.
>
> Visist the UV-82 home page on the miklor.com<http://miklor.com> website
> and look for "Menu Definitions - Detailed" to get a copy of the "Reference
> for UV-82 Menus". It explains the menus and shows when they are or are not
> active.
>
> http://www.miklor.com/UV82/
>
> CHIRP lets you enter memories into the spreadsheet editor using the shift
> direction and offset, but it actually does the math in the background and
> sends the required RX and TX frequencies to the radio.
>
> To verify all is working as it should, select a display (A or B) in MR
> mode that has its Memory Display Format set to FREQuency (menu 21 or menu
> 22) and then select a channel that has been programmed for a repeater. The
> currently selected display should be showing the RX frequency. Now tap the
> [*SCAN] key to put the radio into "reverse" mode.. An "R" should appear in
> the upper status display and the any display with its MDF set to FREQ
> should be showing the programmed TX frequency. Tap the [*SCAN] key again to
> exit "reverse" mode.
>
> In MR mode the "+-" symbol is displayed to indicate that the RX and TX
> frequencies are different. This would be true for a repeater channel with
> standard offset, a split channel with an odd offset, a cross-band channel
> or TX inhibited channel. A separate "+" or "-" indication is only available
> in VFO mode when menu 25 and menu 26 are valid.
>
> Jim KC9HI
>
>
> On Wed, May 14, 2014 at 9:04 AM, Adam Brady <adamtbrady at cassiausa.com
> <mailto:adamtbrady at cassiausa.com>> wrote:
> Hello and thank you to all who have given their experience here.  The
> issue I am having is that on my CHIRP I have the OFFSET at .600, and the
> DUPLEX either a + or -.  However when I upload this to my radio it does not
> take the settings.  My radio reads OFFSET 00.000 and DUPLEX ?none?.  I just
> finished uninstalling, and reinstalling, CHIRP.  When I did my initial
> upload from the radio the settings in CHIRP show the correct OFFSET and
> DUPLEX in the radio.  I tried to find this already reported, but did not.
>
>
> Adam T. Brady
> Cassia Engineered Products Corp.
> 1013 North Parsons Ave.
> Brandon FL 33510
> Online: CASSIAUSA.COM<http://www.cassiausa.com/>
> E-mail : adamtbrady at cassiausa.com<mailto:adamtbrady at cassiausa.com>
> Office (813) 643 9696<tel:%28813%29%20643%209696>
> Cell      (813) 967 3925<tel:%28813%29%20967%203925>
>
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com<mailto:
> chirp_users at intrepid.danplanet.com>
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140514/04a95e34/attachment-0001.html
>
> ------------------------------
>
> Message: 15
> Date: Wed, 14 May 2014 17:32:08 +0200
> From: Marthijn Soesbergen <marthijnsoesbergen at gmail.com>
> Subject: Re: [chirp_users] Programing a Baofeng UV-82 with Chirp on
>         osx     10.9.2
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID: <84C27DBF-9B99-436A-8537-D1EA59F37EBA at gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Christian,
>
> Ik using a UV-5R and I program it with the same driver. If you want me to
> I can send you my driver and see if that works for you. Are you using the
> Kenwood style cable?
>
> Regards,
> Marthijn Soesbergen
>
> Verstuurd vanaf mijn iPhone
>
> > Op 14 mei 2014 om 17:01 heeft Christian Schwarz <
> coffeeisallineed at gmail.com> het volgende geschreven:
> >
> > Hi everybody,
> >
> > I?d like to know, if anybody managed to program the UV-82 using chirp
> (or the daily build 20140428) on osx 10.9.2. I read that one might or might
> not have to disable apple?s own driver for FTDI chipset. I?ve been
> googleing the topic for a few days now and have not found a way to make it
> work on my mbp. The system report will tell me that a USB-Serial Controller
> is there:
> >
> > USB-Serial Controller:
> >
> >   Product ID: 0x2303
> >   Vendor ID:  0x067b  (Prolific Technology, Inc.)
> >   Version:     3.00
> >   Speed:      Up to 12 Mb/sec
> >   Manufacturer:       Prolific Technology Inc.
> >   Location ID:        0xfa130000 / 6
> >   Current Available (mA):     500
> >   Current Required (mA):      100
> >
> > When I try to "download from radio? I have four choices in a dropdown
> menu, each of which will give me an error message:
> >
> > - /dev/cu.Bluetooth-Incoming-Port                     error: An error
> has occurred - Radio did not respond
> > - /dev/cu.Bluetooth-Modem                             error: An error
> has occurred - could not open port /dev/cu.Bluetooth-Modem: [Errno 16]
> Resource busy:   '/dev/cu.Bluetooth-Modem'
> > - /dev/cu.NoZAP-PL2303-000013FA               error: Radio did not
> respond
> > - /dev/cu.usbserial                                           error:
> Radio did not respond
> >
> > Any ideas? I am using the USB programming cable from Baofeng, that came
> with the radio.
> >
> > btw. under windows7 (installed on the mbp) it works like a charm.
> >
> > Cheers,
> > Chris
> >
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140514/86f51b30/attachment-0001.html
>
> ------------------------------
>
> Message: 16
> Date: Wed, 14 May 2014 11:38:01 -0400
> From: MCH <mch at nb.net>
> Subject: Re: [chirp_users] Baofeng UV-82 Offset
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID: <5086E911-62C7-4CFB-B81D-10783952F5E9 at nb.net>
> Content-Type: text/plain; charset="utf-8"
>
> Any chance the Anytone 3318-A will be one of those radios in the future?
>
> Joe M.
>
> On May 14, 2014, at 10:01 AM, John LaMartina <JohnLa at usa.net> wrote:
>
> > Before uploading to CHIRP you must create an initial template by doing a
> Download From Radio.
> > CHIRP supports over 60 model radios and needs to know which radio it is
> programming.
> > Make updates to the template and Upload To Radio.
> >
> > This can be found at http://www.miklor.com/UV5R
> > In the software section.
> >
> > I hope this helps.
> >
> > John
> > http://www.miklor.com
> >
> >
> > Sent via iPhone6
> >
> > On May 14, 2014, at 9:04 AM, Adam Brady <adamtbrady at cassiausa.com>
> wrote:
> >
> >> Hello and thank you to all who have given their experience here.  The
> issue I am having is that on my CHIRP I have the OFFSET at .600, and the
> DUPLEX either a + or -.  However when I upload this to my radio it does not
> take the settings.  My radio reads OFFSET 00.000 and DUPLEX ?none?.  I just
> finished uninstalling, and reinstalling, CHIRP.  When I did my initial
> upload from the radio the settings in CHIRP show the correct OFFSET and
> DUPLEX in the radio.  I tried to find this already reported, but did not.
> >>
> >>
> >> Adam T. Brady
> >> Cassia Engineered Products Corp.
> >> 1013 North Parsons Ave.
> >> Brandon FL 33510
> >> Online: CASSIAUSA.COM
> >> E-mail : adamtbrady at cassiausa.com
> >> Office (813) 643 9696
> >> Cell      (813) 967 3925
> >>
> >>
> >> _______________________________________________
> >> chirp_users mailing list
> >> chirp_users at intrepid.danplanet.com
> >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140514/889fb8f4/attachment-0001.html
>
> ------------------------------
>
> Message: 17
> Date: Wed, 14 May 2014 18:34:19 +0200
> From: Christian Schwarz <coffeeisallineed at gmail.com>
> Subject: Re: [chirp_users] Programing a Baofeng UV-82 with Chirp on
>         osx     10.9.2
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID: <B0FFBCE2-A7A7-451F-818E-F3C89E0098CA at gmail.com>
> Content-Type: text/plain; charset="windows-1252"
>
> Hi Marthijn,
>
> the cable I use is this:
> http://ecx.images-amazon.com/images/I/41iI3L%2BXoeL.jpg, at least from
> its appearance.
> Sure, send me your driver. I?ll try anything once. Do you know if I need
> to unload the current driver?and in case I have to, how I do it? Sorry for
> the noob questions.
>
> Cheers,
> Chris
>
> On May 14, 2014, at 5:32 PM, Marthijn Soesbergen <
> marthijnsoesbergen at gmail.com> wrote:
>
> > Christian,
> >
> > Ik using a UV-5R and I program it with the same driver. If you want me
> to I can send you my driver and see if that works for you. Are you using
> the Kenwood style cable?
> >
> > Regards,
> > Marthijn Soesbergen
> >
> > Verstuurd vanaf mijn iPhone
> >
> > Op 14 mei 2014 om 17:01 heeft Christian Schwarz <
> coffeeisallineed at gmail.com> het volgende geschreven:
> >
> >> Hi everybody,
> >>
> >> I?d like to know, if anybody managed to program the UV-82 using chirp
> (or the daily build 20140428) on osx 10.9.2. I read that one might or might
> not have to disable apple?s own driver for FTDI chipset. I?ve been
> googleing the topic for a few days now and have not found a way to make it
> work on my mbp. The system report will tell me that a USB-Serial Controller
> is there:
> >>
> >> USB-Serial Controller:
> >>
> >>   Product ID:        0x2303
> >>   Vendor ID: 0x067b  (Prolific Technology, Inc.)
> >>   Version:    3.00
> >>   Speed:     Up to 12 Mb/sec
> >>   Manufacturer:      Prolific Technology Inc.
> >>   Location ID:       0xfa130000 / 6
> >>   Current Available (mA):    500
> >>   Current Required (mA):     100
> >>
> >> When I try to "download from radio? I have four choices in a dropdown
> menu, each of which will give me an error message:
> >>
> >> - /dev/cu.Bluetooth-Incoming-Port                    error: An error
> has occurred - Radio did not respond
> >> - /dev/cu.Bluetooth-Modem                            error: An error
> has occurred - could not open port /dev/cu.Bluetooth-Modem: [Errno 16]
> Resource busy:   '/dev/cu.Bluetooth-Modem'
> >> - /dev/cu.NoZAP-PL2303-000013FA              error: Radio did not
> respond
> >> - /dev/cu.usbserial                                          error:
> Radio did not respond
> >>
> >> Any ideas? I am using the USB programming cable from Baofeng, that came
> with the radio.
> >>
> >> btw. under windows7 (installed on the mbp) it works like a charm.
> >>
> >> Cheers,
> >> Chris
> >>
> >>
> >> _______________________________________________
> >> chirp_users mailing list
> >> chirp_users at intrepid.danplanet.com
> >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140514/953c0fe7/attachment-0001.html
>
> ------------------------------
>
> Message: 18
> Date: Wed, 14 May 2014 09:35:22 -0700 (PDT)
> From: "Jens J." <kd4tjx at yahoo.com>
> Subject: Re: [chirp_users] Programing a Baofeng UV-82 with Chirp on
>         osx     10.9.2
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
>         <1400085322.93529.YahooMailNeo at web125305.mail.ne1.yahoo.com>
> Content-Type: text/plain; charset="utf-8"
>
> 1. You dont have an ftdi chipset driver - so fixes for that dont apply.
> 2. You are using prolific (pl2303) and one of the open source drivers, as
> evidenced by the /dev/NoZAP* device.
> 3. try my driver package here:?
> http://chirp.danplanet.com/projects/chirp/wiki/MacOS_Tips#Generic-PL-2303-cables-counterfeit-andor-?Generic
> ?
> 4. it should yield a device like : /dev/tty.PL2303-xxxxxxxx
>
> If you still get radio is not responding, then there could be a cable,
> and/or connection issue.
> You mentioned you already eliminated that as a possibility, that you were
> able to program same radio and cable combo on win 7.
>
>
> ________________________________
>  From: Marthijn Soesbergen <marthijnsoesbergen at gmail.com>
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Sent: Wednesday, May 14, 2014 10:32 AM
> Subject: Re: [chirp_users] Programing a Baofeng UV-82 with Chirp on osx
> 10.9.2
>
>
>
> Christian,
>
> Ik using a UV-5R and I program it with the same driver. If you want me to
> I can send you my driver and see if that works for you. Are you using the
> Kenwood style cable?
>
> Regards,
> Marthijn Soesbergen
>
> Verstuurd vanaf mijn iPhone
>
> Op 14 mei 2014 om 17:01 heeft Christian Schwarz <
> coffeeisallineed at gmail.com> het volgende geschreven:
>
>
> Hi everybody,
>
> I?d like to know, if anybody managed to program the UV-82 using chirp (or
> the daily build 20140428) on osx 10.9.2. I read that one might or might not
> have to disable apple?s own driver for FTDI chipset. I?ve been googleing
> the topic for a few days now and have not found a way to make it work on my
> mbp. The system report will tell me that a USB-Serial Controller is there:
>
> USB-Serial Controller:
>
> ? Product ID:0x2303
> ? Vendor ID:0x067b? (Prolific Technology, Inc.)
> ? Version: 3.00
> ? Speed:Up to 12 Mb/sec
> ? Manufacturer:Prolific Technology Inc.
> ? Location ID:0xfa130000 / 6
> ? Current Available (mA):500
> ? Current Required (mA):100
>
> When I try to "download from radio? I have four choices in a dropdown
> menu, each of which will give me an error message:
>
> - /dev/cu.Bluetooth-Incoming-Porterror: An error has occurred - Radio did
> not respond
> -?/dev/cu.Bluetooth-Modemerror: An error has occurred -?could not open
> port /dev/cu.Bluetooth-Modem: [Errno 16] Resource busy:
> '/dev/cu.Bluetooth-Modem'
> -?/dev/cu.NoZAP-PL2303-000013FAerror:?Radio did not respond
> -?/dev/cu.usbserial?error:?Radio did not respond
>
> Any ideas? I am using the USB programming cable from Baofeng, that came
> with the radio.?
>
> btw. under windows7 (installed on the mbp) it works like a charm.
>
> Cheers,
> Chris
>
>
> _______________________________________________
> >chirp_users mailing list
> >chirp_users at intrepid.danplanet.com
> >http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140514/bc7855fd/attachment-0001.html
>
> ------------------------------
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>
> End of chirp_users Digest, Vol 65, Issue 9
> ******************************************
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140515/a20fee25/attachment-0002.html 


More information about the chirp_users mailing list