[chirp_users] UV-82 question....

[Jim Unroe]

Forrest,

Visit the UV-82 home page on the miklor.com website.

http://www.miklor.com/UV82/

Many of the CHIRP settings correspond to menus in the radio. So scroll down
to Menu Definitions - Detailed. The links there will allow you to view or
get a copy of the "Reference for UV-82 Menus". For your example, the Scan
Resume method pertains to menu 18 (SC-REV).

>From this guide:

TO=Time Operation - scanning will resume after a fixed time has passed
CO=Carrier Operation - scanning will resume after the active signal
disappears
SE=Search Operation - scanning will not resume

Both the time the radio stays on a channel before scanning continues (TO)
or after a signal is no longer being received and scanning continues (CO)
is set in the firmware and cannot be changed.

Jim KC9HI

On Tue, May 27, 2014 at 4:51 PM, Forrest <wfj at usa.com> wrote:

> Hi….new to the list, with a question.
>
> Using CHIRP 0.4.0 with a UV-82 that I recently purchased.  In the .img
> file there are two tabs on the left, Memories and Settings.  I found a wiki
> that pretty well describes the various columns along with how to set things
> up in Memories.  However, there are quite a few things under ‘Settings’ and
> I have not found a wiki or other reference to those.  Does one exist?  I
> realize that many of these settings are not things that would be in need of
> change, but others I’d like to know more about.  A simple example would be
> under ‘Advanced Settings’ is ‘Scan Resume’ with the options of CO, TO and
> SE???  There are other things as well, but that’s an example.  Commercial
> radios I’ve used before have scan resume setting in number of seconds.
>
> BTW, I have no intention of screwing up the radio by randomly changing
> things which aren’t well defined or explained.  That’s why I’m asking here!
>
> :)
>
> Thanks,
> Forrest
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140527/af344561/attachment.html