[chirp_users] Yaesu FT-8900 and FTDI USB cable problem

[Milton]

Make sure you are getting the radio into the clone tx mode. don't forget to
hit the set button so the radio
blanks out then allows you to press v/m to start the radio to listen for
Chirp.


On Sat, May 24, 2014 at 12:47 PM, Lee Alexander <leealexander at cox.net>wrote:

>  This may sound funny, but make sure the cable is completely seated into
> the radio. Sometimes they go in a little stiff, and with a new radio it may
> feel like it’s properly inserted but it needs to be pushed in further.
>
>
> *From:* John Cooley <wb8wbn at arrl.net>
> *Sent:* ‎Friday‎, ‎May‎ ‎23‎, ‎2014 ‎10‎:‎03‎ ‎PM
> *To:* chirp_users <chirp_users at intrepid.danplanet.com>
>
> Anybody get this cable to work with the radio ?
> I have installed the drivers on XP SP3. Comes up as COM5.
> CHIRP says the radio is not connected.
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140524/9054b12a/attachment.html