[chirp_users] chirp_users Digest, Vol 65, Issue 17

Michael Clark
Fri May 23 11:13:28 PDT 2014


Thanks, John K3NXU, for the info.
Mike Clark KG7LRF

> From: chirp_users-request at intrepid.danplanet.com
> Subject: chirp_users Digest, Vol 65, Issue 17
> To: chirp_users at intrepid.danplanet.com
> Date: Thu, 22 May 2014 12:00:02 -0700
> 
> Send chirp_users mailing list submissions to
> 	chirp_users at intrepid.danplanet.com
> 
> To subscribe or unsubscribe via the World Wide Web, visit
> 	http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> or, via email, send a message with subject or body 'help' to
> 	chirp_users-request at intrepid.danplanet.com
> 
> You can reach the person managing the list at
> 	chirp_users-owner at intrepid.danplanet.com
> 
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of chirp_users digest..."
> 
> 
> Today's Topics:
> 
>    1. Baofeng UV-5RA (Jack Speer)
>    2. Re: Baofeng UV-5RA (Jim Unroe)
>    3. Re: Baofeng UV-5RA (Richard Mogford)
>    4. Re: Baofeng UV-5RA (Richard Mogford)
>    5. Re: Baofeng UV-5RA (Michael Rathbun)
>    6. Re: Baofeng UV-5RA (Richard Mogford)
>    7. Re: Baofeng UV-5RA (Richard Mogford)
>    8. Change language from Chinese to English-Baofeng UV-5R
>       (Michael Clark)
>    9. Re: Change language from Chinese to English-Baofeng	UV-5R
>       (John LaMartina)
>   10. Re: Change language from Chinese to English-Baofeng	UV-5R
>       (Richard Mogford)
>   11. Re: Change language from Chinese to English-Baofeng	UV-5R
>       (Dennis Klipa)
>   12. Re: Change language from Chinese to English-Baofeng	UV-5R
>       (Jim Unroe)
>   13. Re: Cable (Milton)
>   14. Re: Cable (John LaMartina)
>   15. Re: Cable (Richard Mogford)
> 
> 
> ----------------------------------------------------------------------
> 
> Message: 1
> Date: Wed, 21 May 2014 16:03:35 -0400
> From: Jack Speer <speerj at buck.com>
> Subject: [chirp_users] Baofeng UV-5RA
> To: chirp_users at intrepid.danplanet.com
> Message-ID: <6B4D3E423D8 at buck.com>
> Content-Type: text/plain; charset="us-ascii"; format=flowed
> 
> Transceiver stays in transmit once I plug in the programming cable to 
> the USB port.
> 
> Ideas?
> 
> Help please.
> 
> 
> 
> 
> ------------------------------
> 
> Message: 2
> Date: Wed, 21 May 2014 16:12:06 -0400
> From: Jim Unroe <rock.unroe at gmail.com>
> Subject: Re: [chirp_users] Baofeng UV-5RA
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
> 	<CADnO8U4PH3GErLv-pM=Cj7P9-O5ZBUsmE2K-FNuyHJtZCjCH-g at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
> 
> If you are using Windows and your programming cable claims to have a
> Prolific chip in it , downgrade the driver to v3.2.0.0.0 and you should be
> good.
> 
> http://www.miklor.com/COM/UV_Drivers.php
> 
> 
> Jim KC9HI
> 
> 
> On Wed, May 21, 2014 at 4:03 PM, Jack Speer <speerj at buck.com> wrote:
> 
> > Transceiver stays in transmit once I plug in the programming cable to
> > the USB port.
> >
> > Ideas?
> >
> > Help please.
> >
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140521/c2e69d4f/attachment-0001.html 
> 
> ------------------------------
> 
> Message: 3
> Date: Wed, 21 May 2014 13:25:20 -0700
> From: Richard Mogford <rchrdm at earthlink.net>
> Subject: Re: [chirp_users] Baofeng UV-5RA
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID: <7DD8A151-7517-4A1A-ACB3-400E07A216C5 at earthlink.net>
> Content-Type: text/plain; charset=us-ascii
> 
> I noticed that too at first.  Try turning off the radio, plug the cable into the radio, then turn it on.  The radio may also be affected by whether the USB cable is set up properly, with a driver, etc.
> 
> Richard
> 
> 
> On May 21, 2014, at 1:03 PM, Jack Speer <speerj at buck.com> wrote:
> 
> > Transceiver stays in transmit once I plug in the programming cable to 
> > the USB port.
> > 
> > Ideas?
> > 
> > Help please.
> > 
> > 
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> 
> 
> 
> ------------------------------
> 
> Message: 4
> Date: Wed, 21 May 2014 13:28:45 -0700
> From: Richard Mogford <rchrdm at earthlink.net>
> Subject: Re: [chirp_users] Baofeng UV-5RA
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID: <6831274A-C8A2-4DD1-AB43-ADD53219F88E at earthlink.net>
> Content-Type: text/plain; charset="us-ascii"
> 
> Also, the driver on this site works for me using the 2303 Prolific chip with a very cheap cable from Amazon ($4.70 shipped).
> 
> http://www.409shop.com/409shop_product.php?id=103760 
> 
> This site is actually suggested in the CHIRP user manual that is on line.  I have not tried the driver on the miklor site.
> 
> One key thing for the driver at the 409 shop.  You run the driver installer then restart the computer.  Then you can see the cable being recognized in the Device Manager and see which port it is using.  It was on COM5 for me.  You then set COM5 in CHIRP.
> 
> Richard
> 
> 
> On May 21, 2014, at 1:12 PM, Jim Unroe <rock.unroe at gmail.com> wrote:
> 
> > If you are using Windows and your programming cable claims to have a Prolific chip in it , downgrade the driver to v3.2.0.0.0 and you should be good.
> > 
> > http://www.miklor.com/COM/UV_Drivers.php
> > 
> > 
> > Jim KC9HI
> > 
> > 
> > On Wed, May 21, 2014 at 4:03 PM, Jack Speer <speerj at buck.com> wrote:
> > Transceiver stays in transmit once I plug in the programming cable to
> > the USB port.
> > 
> > Ideas?
> > 
> > Help please.
> > 
> > 
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > 
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> 
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140521/60e1e0fa/attachment-0001.html 
> 
> ------------------------------
> 
> Message: 5
> Date: Wed, 21 May 2014 16:26:59 -0700
> From: Michael Rathbun <KL7F at kl7f.us>
> Subject: Re: [chirp_users] Baofeng UV-5RA
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID: <fbdqn9lr3idbbhkb39dqlsodbg8bbj9gu3 at tesp.com>
> Content-Type: text/plain; charset=us-ascii
> 
> On Wed, 21 May 2014 16:03:35 -0400, Jack Speer <speerj at buck.com> wrote:
> 
> >Transceiver stays in transmit once I plug in the programming cable to 
> >the USB port.
> >
> >Ideas?
> 
> Rather than fuss with the driver, I have two solutions:
> 
> 1.  Plug the radio in while turned off, ready Chirp for whatever operation,
> turn the radio on and click the OK button on Chirp as soon as the version
> string shows up in the radio display.
> 
> 2.  Program a non-transmit channel (I have local NOAA weather in 
> channel 1), tune to that channel before plugging in, and no further issues.
> 
> mdr  KL7F
> -- 
>    Sometimes half-ass is exactly the right amount of ass.
>        -- Wonderella
> 
> 
> 
> ------------------------------
> 
> Message: 6
> Date: Wed, 21 May 2014 17:00:00 -0700
> From: Richard Mogford <rchrdm at earthlink.net>
> Subject: Re: [chirp_users] Baofeng UV-5RA
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID: <D59C2AE0-8D18-4C01-A1CD-C6C420770647 at earthlink.net>
> Content-Type: text/plain; charset=us-ascii
> 
> By the way, the provided earpiece also likes this procedure.  When I first plugged it in, the radio did strange things and I could not hear anything in the earpiece.  If I plug the earpiece in and THEN turn the radio on, it works fine.
> 
> Richard
> 
> 
> On May 21, 2014, at 1:25 PM, Richard Mogford <rchrdm at earthlink.net> wrote:
> 
> > I noticed that too at first.  Try turning off the radio, plug the cable into the radio, then turn it on.  The radio may also be affected by whether the USB cable is set up properly, with a driver, etc.
> > 
> > Richard
> > 
> > 
> > On May 21, 2014, at 1:03 PM, Jack Speer <speerj at buck.com> wrote:
> > 
> >> Transceiver stays in transmit once I plug in the programming cable to 
> >> the USB port.
> >> 
> >> Ideas?
> >> 
> >> Help please.
> >> 
> >> 
> >> _______________________________________________
> >> chirp_users mailing list
> >> chirp_users at intrepid.danplanet.com
> >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > 
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> 
> 
> 
> ------------------------------
> 
> Message: 7
> Date: Wed, 21 May 2014 19:49:49 -0700
> From: "Richard Mogford" <rchrdm at earthlink.net>
> Subject: Re: [chirp_users] Baofeng UV-5RA
> To: "'Discussion of CHIRP'" <chirp_users at intrepid.danplanet.com>
> Message-ID: <008901cf7568$817794a0$8466bde0$@earthlink.net>
> Content-Type: text/plain;	charset="us-ascii"
> 
> To answer my own question from earlier today, I accidentally found the
> Settings tab.  After you set up the radio and save a set of repeater sites,
> the Settings tab seems to be available to configure the radio.
> 
> Richard
> 
> -----Original Message-----
> From: chirp_users-bounces at intrepid.danplanet.com
> [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Richard
> Mogford
> Sent: Wednesday, May 21, 2014 5:00 PM
> To: Discussion of CHIRP
> Subject: Re: [chirp_users] Baofeng UV-5RA
> 
> By the way, the provided earpiece also likes this procedure.  When I first
> plugged it in, the radio did strange things and I could not hear anything in
> the earpiece.  If I plug the earpiece in and THEN turn the radio on, it
> works fine.
> 
> Richard
> 
> 
> On May 21, 2014, at 1:25 PM, Richard Mogford <rchrdm at earthlink.net> wrote:
> 
> > I noticed that too at first.  Try turning off the radio, plug the cable
> into the radio, then turn it on.  The radio may also be affected by whether
> the USB cable is set up properly, with a driver, etc.
> > 
> > Richard
> > 
> > 
> > On May 21, 2014, at 1:03 PM, Jack Speer <speerj at buck.com> wrote:
> > 
> >> Transceiver stays in transmit once I plug in the programming cable to 
> >> the USB port.
> >> 
> >> Ideas?
> >> 
> >> Help please.
> >> 
> >> 
> >> _______________________________________________
> >> chirp_users mailing list
> >> chirp_users at intrepid.danplanet.com
> >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > 
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> 
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> 
> 
> 
> ------------------------------
> 
> Message: 8
> Date: Wed, 21 May 2014 20:27:48 -0700
> From: Michael Clark <mpjjm0101 at msn.com>
> Subject: [chirp_users] Change language from Chinese to English-Baofeng
> 	UV-5R
> To: "chirp_users at intrepid.danplanet.com"
> 	<chirp_users at intrepid.danplanet.com>
> Message-ID: <BLU182-W929E83B453C1B8B0C03DDBB53F0 at phx.gbl>
> Content-Type: text/plain; charset="iso-8859-1"
> 
> When entering my one and only repeater frequency, offset, TX, RX, etc., the language changed from English to Chinese.  How do I change it back to English?  Can't seem to find the commands in the booklet.  Radio receives and transmits fine.
> Mike in Burien, KG7LRF, new technician class licensee
> 
> > From: chirp_users-request at intrepid.danplanet.com
> > Subject: chirp_users Digest, Vol 65, Issue 16
> > To: chirp_users at intrepid.danplanet.com
> > Date: Wed, 21 May 2014 12:00:02 -0700
> > 
> > Send chirp_users mailing list submissions to
> > 	chirp_users at intrepid.danplanet.com
> > 
> > To subscribe or unsubscribe via the World Wide Web, visit
> > 	http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > or, via email, send a message with subject or body 'help' to
> > 	chirp_users-request at intrepid.danplanet.com
> > 
> > You can reach the person managing the list at
> > 	chirp_users-owner at intrepid.danplanet.com
> > 
> > When replying, please edit your Subject line so it is more specific
> > than "Re: Contents of chirp_users digest..."
> > 
> > 
> > Today's Topics:
> > 
> >    1. Cable (Richard Mogford)
> >    2. Re: Cable (Richard Mogford)
> >    3. Re: Cable (Nate Perkins)
> >    4. Re: Summer Project : transcoding CHIRP (W Paul Mills)
> > 
> > 
> > ----------------------------------------------------------------------
> > 
> > Message: 1
> > Date: Tue, 20 May 2014 22:26:57 -0700
> > From: "Richard Mogford" <rchrdm at earthlink.net>
> > Subject: [chirp_users] Cable
> > To: <chirp_users at intrepid.danplanet.com>
> > Message-ID: <000501cf74b5$49d2d450$dd787cf0$@earthlink.net>
> > Content-Type: text/plain;	charset="us-ascii"
> > 
> > I am new to this list and probably am making mistakes that are already well
> > known!
> > 
> > I bought a cheap cable running the 2303 chip, which I found later is not so
> > good.
> > 
> > The drivers on the supplied CD seem to work OK, but when I go to use CHIRP,
> > I get an "Error Occurred" message saying "could not open port COM3: [Error
> > 2] The system cannot find the file specified."
> > 
> > Is there anything I can try here, or should I just shop for a better cable?
> > 
> > Richard
> > 
> > 
> > 
> > ------------------------------
> > 
> > Message: 2
> > Date: Tue, 20 May 2014 22:52:11 -0700
> > From: "Richard Mogford" <rchrdm at earthlink.net>
> > Subject: Re: [chirp_users] Cable
> > To: "'Discussion of CHIRP'" <chirp_users at intrepid.danplanet.com>
> > Message-ID: <000e01cf74b8$cfa78320$6ef68960$@earthlink.net>
> > Content-Type: text/plain;	charset="us-ascii"
> > 
> > Well, I got it working by reading the instructions on the CHIRP web site.
> > It suggested downloading a driver from the 409shop.com web site, which I
> > did.  Amazingly, the cheap (about $4 including shipping) worked!
> > 
> > Richard
> > 
> > -----Original Message-----
> > From: chirp_users-bounces at intrepid.danplanet.com
> > [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Richard
> > Mogford
> > Sent: Tuesday, May 20, 2014 10:27 PM
> > To: chirp_users at intrepid.danplanet.com
> > Subject: [chirp_users] Cable
> > 
> > I am new to this list and probably am making mistakes that are already well
> > known!
> > 
> > I bought a cheap cable running the 2303 chip, which I found later is not so
> > good.
> > 
> > The drivers on the supplied CD seem to work OK, but when I go to use CHIRP,
> > I get an "Error Occurred" message saying "could not open port COM3: [Error
> > 2] The system cannot find the file specified."
> > 
> > Is there anything I can try here, or should I just shop for a better cable?
> > 
> > Richard
> > 
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > 
> > 
> > 
> > ------------------------------
> > 
> > Message: 3
> > Date: Tue, 20 May 2014 22:10:31 -0800
> > From: Nate Perkins <perkins.nc at gmail.com>
> > Subject: Re: [chirp_users] Cable
> > To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> > Message-ID: <2F696FA0-8CF9-4DD5-82F6-2EBF6873EC93 at gmail.com>
> > Content-Type: text/plain; charset=us-ascii
> > 
> > I would suggest just tossing the idea of using whatever driver you got on the supplied CD. I ordered a cable and disc set off of Amazon, threw the disc out, downloaded everything off of CHIRP, plugged in my cable, and it went flawless. Not one hitch. This was a Baofeng UV-82. CHIRP rocks!
> > 
> > 
> > Nate, KL3NP
> > Nome, Alaska
> > 
> > On May 20, 2014, at 9:26 PM, Richard Mogford wrote:
> > 
> > > I am new to this list and probably am making mistakes that are already well
> > > known!
> > > 
> > > I bought a cheap cable running the 2303 chip, which I found later is not so
> > > good.
> > > 
> > > The drivers on the supplied CD seem to work OK, but when I go to use CHIRP,
> > > I get an "Error Occurred" message saying "could not open port COM3: [Error
> > > 2] The system cannot find the file specified."
> > > 
> > > Is there anything I can try here, or should I just shop for a better cable?
> > > 
> > > Richard
> > > 
> > > _______________________________________________
> > > chirp_users mailing list
> > > chirp_users at intrepid.danplanet.com
> > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > 
> > 
> > 
> > ------------------------------
> > 
> > Message: 4
> > Date: Wed, 21 May 2014 08:34:46 -0500
> > From: W Paul Mills <AC0HY at WPMills.com>
> > Subject: Re: [chirp_users] Summer Project : transcoding CHIRP
> > To: chirp_users at intrepid.danplanet.com
> > Message-ID: <537CAB76.9090209 at WPMills.com>
> > Content-Type: text/plain; charset=ISO-8859-1
> > 
> > Not exactly true. With Windows 8 Prolific has announced that certain
> > common chips will not be supported at all, and they seem to be getting
> > better at preventing the old drivers from working. I have a genuine
> > ICOM cable that recently fell victim to this.
> > 
> > On 05/20/2014 10:54 AM, Niklas Johnson wrote:
> > > Its wrong only if you have a 'counterfeit' Prolific chip, the most 
> > > recent driver revisions that Prolific themselves provided to
> > > Microsoft detects and disables the non-genuine variants. Prolific
> > > is protecting their market share and IP, and Microsoft was
> > > providing a certified manufacturer supplied driver.
> > > 
> > > 
> > > On Tue, May 20, 2014 at 8:41 AM, Pete Mackie <pete at seaquest.com 
> > > <mailto:pete at seaquest.com>> wrote:
> > > 
> > > Except starting with Mac OS X Mavericks Apple is providing an O/S 
> > > built in USB to serial driver. I am using the Apple provided USB
> > > to serial driver with CHIRP with zero problems.
> > > 
> > > Windows has provides an O/S built in USB serial driver. The
> > > dilemma is the stupid Microsoft thinks they should automatically
> > > provide the latest O/S built in USB serial driver. And that is
> > > absolutely the wrong thing to do if you are using a Prolific USB /
> > > serial cable.
> > > 
> > > Pete
> > > 
> > > On May 20, 2014, at 8:17 AM, Andrew <ziltro at ziltro.com 
> > > <mailto:ziltro at ziltro.com>> wrote:
> > > 
> > >> 
> > >> The drivers for certain USB/serial adapter cables will still be 
> > >> required, and they seem to be the main thing causing problems on 
> > >> Windows and Mac OS.
> > >> 
> > > 
> > > 
> > > _______________________________________________ chirp_users mailing
> > > list chirp_users at intrepid.danplanet.com 
> > > <mailto:chirp_users at intrepid.danplanet.com> 
> > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > > 
> > > 
> > > 
> > > 
> > > --
> > > 
> > > Best regards,
> > > 
> > > Niklas Johnson / Tech Rugged Radios 951 E. Grand Avenue Arroyo
> > > Grande, CA 93420 toll free (888) 541-7223 local (805) 541-1696
> > > 
> > > Follow Rugged Radios at: Rugged Radios
> > > <http://www.ruggedradios.com/> Facebook 
> > > <http://www.facebook.com/rugged.radios> Instagram 
> > > <http://instagram.com/ruggedradios> YouTube 
> > > <http://www.youtube.com/ruggedradios> Twitter 
> > > <https://twitter.com/ruggedradios>
> > > 
> > > 
> > > _______________________________________________ chirp_users mailing
> > > list chirp_users at intrepid.danplanet.com 
> > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > > 
> > 
> > 
> > -- 
> > /*************************************************
> > * Amateur Radio Station AC0HY                    *
> > * W. Paul Mills         SN807                    *
> > * Assistant EC Alpha-1 ARES Shawnee/Wabunsee, KS *
> > * President Kaw Valley Amateur Radio Club        *
> > *************************************************/
> > 
> > 
> > ------------------------------
> > 
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > 
> > 
> > End of chirp_users Digest, Vol 65, Issue 16
> > *******************************************
>  		 	   		  
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140521/dc8405cf/attachment-0001.html 
> 
> ------------------------------
> 
> Message: 9
> Date: Thu, 22 May 2014 00:14:05 -0400
> From: "John LaMartina" <JohnLa at usa.net>
> Subject: Re: [chirp_users] Change language from Chinese to
> 	English-Baofeng	UV-5R
> To: "'Discussion of CHIRP'" <chirp_users at intrepid.danplanet.com>
> Message-ID: <000c01cf7574$45522060$cff66120$@net>
> Content-Type: text/plain; charset="us-ascii"
> 
> Mike,
> MENU 14 changes the language.
> Refer to: http://www.miklor.com/uv5r/UV5R-MenuDef.php
> 
> John K3NXU
> http://www.miklor.com/UV5R/
> 
> 
> 
> 
> 
> From: chirp_users-bounces at intrepid.danplanet.com [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Michael Clark
> Sent: Wednesday, May 21, 2014 11:28 PM
> To: chirp_users at intrepid.danplanet.com
> Subject: [chirp_users] Change language from Chinese to English-Baofeng UV-5R
> 
> When entering my one and only repeater frequency, offset, TX, RX, etc., the language changed from English to Chinese.  How do I
> change it back to English?  Can't seem 
> to find the commands in the booklet.  Radio receives and transmits fine.
> 
> Mike in Burien, KG7LRF, new technician class licensee
> 
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140522/d9e98ad3/attachment-0001.html 
> 
> ------------------------------
> 
> Message: 10
> Date: Wed, 21 May 2014 21:33:56 -0700
> From: "Richard Mogford" <rchrdm at earthlink.net>
> Subject: Re: [chirp_users] Change language from Chinese to
> 	English-Baofeng	UV-5R
> To: "'Discussion of CHIRP'" <chirp_users at intrepid.danplanet.com>
> Message-ID: <009a01cf7577$0bed68e0$23c83aa0$@earthlink.net>
> Content-Type: text/plain; charset="us-ascii"
> 
> It is under menu 14.  There is an English/Chinese/None choice that is not
> shown in the manual.
> 
>  
> 
> There is a better manual at this site: http://www.miklor.com/uv5r/
> 
>  
> 
> Richard
> 
>  
> 
> From: chirp_users-bounces at intrepid.danplanet.com
> [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Michael
> Clark
> Sent: Wednesday, May 21, 2014 8:28 PM
> To: chirp_users at intrepid.danplanet.com
> Subject: [chirp_users] Change language from Chinese to English-Baofeng UV-5R
> 
>  
> 
> When entering my one and only repeater frequency, offset, TX, RX, etc., the
> language changed from English to Chinese.  How do I change it back to
> English?  Can't seem to find the commands in the booklet.  Radio receives
> and transmits fine.
> 
>  
> 
> Mike in Burien, KG7LRF, new technician class licensee
> 
> > From: chirp_users-request at intrepid.danplanet.com
> <mailto:chirp_users-request at intrepid.danplanet.com> 
> > Subject: chirp_users Digest, Vol 65, Issue 16
> > To: chirp_users at intrepid.danplanet.com
> <mailto:chirp_users at intrepid.danplanet.com> 
> > Date: Wed, 21 May 2014 12:00:02 -0700
> > 
> > Send chirp_users mailing list submissions to
> > chirp_users at intrepid.danplanet.com
> <mailto:chirp_users at intrepid.danplanet.com> 
> > 
> > To subscribe or unsubscribe via the World Wide Web, visit
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > or, via email, send a message with subject or body 'help' to
> > chirp_users-request at intrepid.danplanet.com
> <mailto:chirp_users-request at intrepid.danplanet.com> 
> > 
> > You can reach the person managing the list at
> > chirp_users-owner at intrepid.danplanet.com
> <mailto:chirp_users-owner at intrepid.danplanet.com> 
> > 
> > When replying, please edit your Subject line so it is more specific
> > than "Re: Contents of chirp_users digest..."
> > 
> > 
> > Today's Topics:
> > 
> > 1. Cable (Richard Mogford)
> > 2. Re: Cable (Richard Mogford)
> > 3. Re: Cable (Nate Perkins)
> > 4. Re: Summer Project : transcoding CHIRP (W Paul Mills)
> > 
> > 
> > ----------------------------------------------------------------------
> > 
> > Message: 1
> > Date: Tue, 20 May 2014 22:26:57 -0700
> > From: "Richard Mogford" <rchrdm at earthlink.net
> <mailto:rchrdm at earthlink.net> >
> > Subject: [chirp_users] Cable
> > To: <chirp_users at intrepid.danplanet.com
> <mailto:chirp_users at intrepid.danplanet.com> >
> > Message-ID: <000501cf74b5$49d2d450$dd787cf0$@earthlink.net
> <mailto:000501cf74b5$49d2d450$dd787cf0$@earthlink.net> >
> > Content-Type: text/plain; charset="us-ascii"
> > 
> > I am new to this list and probably am making mistakes that are already
> well
> > known!
> > 
> > I bought a cheap cable running the 2303 chip, which I found later is not
> so
> > good.
> > 
> > The drivers on the supplied CD seem to work OK, but when I go to use
> CHIRP,
> > I get an "Error Occurred" message saying "could not open port COM3: [Error
> > 2] The system cannot find the file specified."
> > 
> > Is there anything I can try here, or should I just shop for a better
> cable?
> > 
> > Richard
> > 
> > 
> > 
> > ------------------------------
> > 
> > Message: 2
> > Date: Tue, 20 May 2014 22:52:11 -0700
> > From: "Richard Mogford" <rchrdm at earthlink.net
> <mailto:rchrdm at earthlink.net> >
> > Subject: Re: [chirp_users] Cable
> > To: "'Discussion of CHIRP'" <chirp_users at intrepid.danplanet.com
> <mailto:chirp_users at intrepid.danplanet.com> >
> > Message-ID: <000e01cf74b8$cfa78320$6ef68960$@earthlink.net
> <mailto:000e01cf74b8$cfa78320$6ef68960$@earthlink.net> >
> > Content-Type: text/plain; charset="us-ascii"
> > 
> > Well, I got it working by reading the instructions on the CHIRP web site.
> > It suggested downloading a driver from the 409shop.com web site, which I
> > did. Amazingly, the cheap (about $4 including shipping) worked!
> > 
> > Richard
> > 
> > -----Original Message-----
> > From: chirp_users-bounces at intrepid.danplanet.com
> <mailto:chirp_users-bounces at intrepid.danplanet.com> 
> > [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Richard
> > Mogford
> > Sent: Tuesday, May 20, 2014 10:27 PM
> > To: chirp_users at intrepid.danplanet.com
> <mailto:chirp_users at intrepid.danplanet.com> 
> > Subject: [chirp_users] Cable
> > 
> > I am new to this list and probably am making mistakes that are already
> well
> > known!
> > 
> > I bought a cheap cable running the 2303 chip, which I found later is not
> so
> > good.
> > 
> > The drivers on the supplied CD seem to work OK, but when I go to use
> CHIRP,
> > I get an "Error Occurred" message saying "could not open port COM3: [Error
> > 2] The system cannot find the file specified."
> > 
> > Is there anything I can try here, or should I just shop for a better
> cable?
> > 
> > Richard
> > 
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> <mailto:chirp_users at intrepid.danplanet.com> 
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > 
> > 
> > 
> > ------------------------------
> > 
> > Message: 3
> > Date: Tue, 20 May 2014 22:10:31 -0800
> > From: Nate Perkins <perkins.nc at gmail.com <mailto:perkins.nc at gmail.com> >
> > Subject: Re: [chirp_users] Cable
> > To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com
> <mailto:chirp_users at intrepid.danplanet.com> >
> > Message-ID: <2F696FA0-8CF9-4DD5-82F6-2EBF6873EC93 at gmail.com
> <mailto:2F696FA0-8CF9-4DD5-82F6-2EBF6873EC93 at gmail.com> >
> > Content-Type: text/plain; charset=us-ascii
> > 
> > I would suggest just tossing the idea of using whatever driver you got on
> the supplied CD. I ordered a cable and disc set off of Amazon, threw the
> disc out, downloaded everything off of CHIRP, plugged in my cable, and it
> went flawless. Not one hitch. This was a Baofeng UV-82. CHIRP rocks!
> > 
> > 
> > Nate, KL3NP
> > Nome, Alaska
> > 
> > On May 20, 2014, at 9:26 PM, Richard Mogford wrote:
> > 
> > > I am new to this list and probably am making mistakes that are already
> well
> > > known!
> > > 
> > > I bought a cheap cable running the 2303 chip, which I found later is not
> so
> > > good.
> > > 
> > > The drivers on the supplied CD seem to work OK, but when I go to use
> CHIRP,
> > > I get an "Error Occurred" message saying "could not open port COM3:
> [Error
> > > 2] The system cannot find the file specified."
> > > 
> > > Is there anything I can try here, or should I just shop for a better
> cable?
> > > 
> > > Richard
> > > 
> > > _______________________________________________
> > > chirp_users mailing list
> > > chirp_users at intrepid.danplanet.com
> <mailto:chirp_users at intrepid.danplanet.com> 
> > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > 
> > 
> > 
> > ------------------------------
> > 
> > Message: 4
> > Date: Wed, 21 May 2014 08:34:46 -0500
> > From: W Paul Mills <AC0HY at WPMills.com <mailto:AC0HY at WPMills.com> >
> > Subject: Re: [chirp_users] Summer Project : transcoding CHIRP
> > To: chirp_users at intrepid.danplanet.com
> <mailto:chirp_users at intrepid.danplanet.com> 
> > Message-ID: <537CAB76.9090209 at WPMills.com
> <mailto:537CAB76.9090209 at WPMills.com> >
> > Content-Type: text/plain; charset=ISO-8859-1
> > 
> > Not exactly true. With Windows 8 Prolific has announced that certain
> > common chips will not be supported at all, and they seem to be getting
> > better at preventing the old drivers from working. I have a genuine
> > ICOM cable that recently fell victim to this.
> > 
> > On 05/20/2014 10:54 AM, Niklas Johnson wrote:
> > > Its wrong only if you have a 'counterfeit' Prolific chip, the most 
> > > recent driver revisions that Prolific themselves provided to
> > > Microsoft detects and disables the non-genuine variants. Prolific
> > > is protecting their market share and IP, and Microsoft was
> > > providing a certified manufacturer supplied driver.
> > > 
> > > 
> > > On Tue, May 20, 2014 at 8:41 AM, Pete Mackie <pete at seaquest.com
> <mailto:pete at seaquest.com%20%0b> 
> > > <mailto:pete at seaquest.com>> wrote:
> > > 
> > > Except starting with Mac OS X Mavericks Apple is providing an O/S 
> > > built in USB to serial driver. I am using the Apple provided USB
> > > to serial driver with CHIRP with zero problems.
> > > 
> > > Windows has provides an O/S built in USB serial driver. The
> > > dilemma is the stupid Microsoft thinks they should automatically
> > > provide the latest O/S built in USB serial driver. And that is
> > > absolutely the wrong thing to do if you are using a Prolific USB /
> > > serial cable.
> > > 
> > > Pete
> > > 
> > > On May 20, 2014, at 8:17 AM, Andrew <ziltro at ziltro.com
> <mailto:ziltro at ziltro.com%20%0b> 
> > > <mailto:ziltro at ziltro.com>> wrote:
> > > 
> > >> 
> > >> The drivers for certain USB/serial adapter cables will still be 
> > >> required, and they seem to be the main thing causing problems on 
> > >> Windows and Mac OS.
> > >> 
> > > 
> > > 
> > > _______________________________________________ chirp_users mailing
> > > list chirp_users at intrepid.danplanet.com
> <mailto:chirp_users at intrepid.danplanet.com>  
> > > <mailto:chirp_users at intrepid.danplanet.com> 
> > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > > 
> > > 
> > > 
> > > 
> > > --
> > > 
> > > Best regards,
> > > 
> > > Niklas Johnson / Tech Rugged Radios 951 E. Grand Avenue Arroyo
> > > Grande, CA 93420 toll free (888) 541-7223 local (805) 541-1696
> > > 
> > > Follow Rugged Radios at: Rugged Radios
> > > <http://www.ruggedradios.com/> Facebook 
> > > <http://www.facebook.com/rugged.radios> Instagram 
> > > <http://instagram.com/ruggedradios> YouTube 
> > > <http://www.youtube.com/ruggedradios> Twitter 
> > > <https://twitter.com/ruggedradios>
> > > 
> > > 
> > > _______________________________________________ chirp_users mailing
> > > list chirp_users at intrepid.danplanet.com
> <mailto:chirp_users at intrepid.danplanet.com>  
> > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > > 
> > 
> > 
> > -- 
> > /*************************************************
> > * Amateur Radio Station AC0HY *
> > * W. Paul Mills SN807 *
> > * Assistant EC Alpha-1 ARES Shawnee/Wabunsee, KS *
> > * President Kaw Valley Amateur Radio Club *
> > *************************************************/
> > 
> > 
> > ------------------------------
> > 
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> <mailto:chirp_users at intrepid.danplanet.com> 
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > 
> > 
> > End of chirp_users Digest, Vol 65, Issue 16
> > *******************************************
> 
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140521/b5572212/attachment-0001.html 
> 
> ------------------------------
> 
> Message: 11
> Date: Thu, 22 May 2014 03:15:20 -0400
> From: Dennis Klipa <klipadk at gmail.com>
> Subject: Re: [chirp_users] Change language from Chinese to
> 	English-Baofeng	UV-5R
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
> 	<CAMy5U++cRGTBaGgn3RBhviES7imb_X1JKUnLoaZhLnamoraVVQ at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
> 
> Mike,
> 
> You can change it manually by going into the menu and changing item 14,
> VOICE.  The procedure to change menu items is in the manual.
> 
> Beset Regards,
> Dennis, N8ERF
> On May 21, 2014 11:28 PM, "Michael Clark" <mpjjm0101 at msn.com> wrote:
> 
> > When entering my one and only repeater frequency, offset, TX, RX, etc.,
> > the language changed from English to Chinese.  How do I change it back to
> > English?  Can't seem to find the commands in the booklet.  Radio receives
> > and transmits fine.
> >
> > Mike in Burien, KG7LRF, new technician class licensee
> >
> > > From: chirp_users-request at intrepid.danplanet.com
> > > Subject: chirp_users Digest, Vol 65, Issue 16
> > > To: chirp_users at intrepid.danplanet.com
> > > Date: Wed, 21 May 2014 12:00:02 -0700
> > >
> > > Send chirp_users mailing list submissions to
> > > chirp_users at intrepid.danplanet.com
> > >
> > > To subscribe or unsubscribe via the World Wide Web, visit
> > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > > or, via email, send a message with subject or body 'help' to
> > > chirp_users-request at intrepid.danplanet.com
> > >
> > > You can reach the person managing the list at
> > > chirp_users-owner at intrepid.danplanet.com
> > >
> > > When replying, please edit your Subject line so it is more specific
> > > than "Re: Contents of chirp_users digest..."
> > >
> > >
> > > Today's Topics:
> > >
> > > 1. Cable (Richard Mogford)
> > > 2. Re: Cable (Richard Mogford)
> > > 3. Re: Cable (Nate Perkins)
> > > 4. Re: Summer Project : transcoding CHIRP (W Paul Mills)
> > >
> > >
> > > ----------------------------------------------------------------------
> > >
> > > Message: 1
> > > Date: Tue, 20 May 2014 22:26:57 -0700
> > > From: "Richard Mogford" <rchrdm at earthlink.net>
> > > Subject: [chirp_users] Cable
> > > To: <chirp_users at intrepid.danplanet.com>
> > > Message-ID: <000501cf74b5$49d2d450$dd787cf0$@earthlink.net>
> > > Content-Type: text/plain; charset="us-ascii"
> > >
> > > I am new to this list and probably am making mistakes that are already
> > well
> > > known!
> > >
> > > I bought a cheap cable running the 2303 chip, which I found later is not
> > so
> > > good.
> > >
> > > The drivers on the supplied CD seem to work OK, but when I go to use
> > CHIRP,
> > > I get an "Error Occurred" message saying "could not open port COM3:
> > [Error
> > > 2] The system cannot find the file specified."
> > >
> > > Is there anything I can try here, or should I just shop for a better
> > cable?
> > >
> > > Richard
> > >
> > >
> > >
> > > ------------------------------
> > >
> > > Message: 2
> > > Date: Tue, 20 May 2014 22:52:11 -0700
> > > From: "Richard Mogford" <rchrdm at earthlink.net>
> > > Subject: Re: [chirp_users] Cable
> > > To: "'Discussion of CHIRP'" <chirp_users at intrepid.danplanet.com>
> > > Message-ID: <000e01cf74b8$cfa78320$6ef68960$@earthlink.net>
> > > Content-Type: text/plain; charset="us-ascii"
> > >
> > > Well, I got it working by reading the instructions on the CHIRP web site.
> > > It suggested downloading a driver from the 409shop.com web site, which I
> > > did. Amazingly, the cheap (about $4 including shipping) worked!
> > >
> > > Richard
> > >
> > > -----Original Message-----
> > > From: chirp_users-bounces at intrepid.danplanet.com
> > > [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Richard
> > > Mogford
> > > Sent: Tuesday, May 20, 2014 10:27 PM
> > > To: chirp_users at intrepid.danplanet.com
> > > Subject: [chirp_users] Cable
> > >
> > > I am new to this list and probably am making mistakes that are already
> > well
> > > known!
> > >
> > > I bought a cheap cable running the 2303 chip, which I found later is not
> > so
> > > good.
> > >
> > > The drivers on the supplied CD seem to work OK, but when I go to use
> > CHIRP,
> > > I get an "Error Occurred" message saying "could not open port COM3:
> > [Error
> > > 2] The system cannot find the file specified."
> > >
> > > Is there anything I can try here, or should I just shop for a better
> > cable?
> > >
> > > Richard
> > >
> > > _______________________________________________
> > > chirp_users mailing list
> > > chirp_users at intrepid.danplanet.com
> > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > >
> > >
> > >
> > > ------------------------------
> > >
> > > Message: 3
> > > Date: Tue, 20 May 2014 22:10:31 -0800
> > > From: Nate Perkins <perkins.nc at gmail.com>
> > > Subject: Re: [chirp_users] Cable
> > > To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> > > Message-ID: <2F696FA0-8CF9-4DD5-82F6-2EBF6873EC93 at gmail.com>
> > > Content-Type: text/plain; charset=us-ascii
> > >
> > > I would suggest just tossing the idea of using whatever driver you got
> > on the supplied CD. I ordered a cable and disc set off of Amazon, threw the
> > disc out, downloaded everything off of CHIRP, plugged in my cable, and it
> > went flawless. Not one hitch. This was a Baofeng UV-82. CHIRP rocks!
> > >
> > >
> > > Nate, KL3NP
> > > Nome, Alaska
> > >
> > > On May 20, 2014, at 9:26 PM, Richard Mogford wrote:
> > >
> > > > I am new to this list and probably am making mistakes that are already
> > well
> > > > known!
> > > >
> > > > I bought a cheap cable running the 2303 chip, which I found later is
> > not so
> > > > good.
> > > >
> > > > The drivers on the supplied CD seem to work OK, but when I go to use
> > CHIRP,
> > > > I get an "Error Occurred" message saying "could not open port COM3:
> > [Error
> > > > 2] The system cannot find the file specified."
> > > >
> > > > Is there anything I can try here, or should I just shop for a better
> > cable?
> > > >
> > > > Richard
> > > >
> > > > _______________________________________________
> > > > chirp_users mailing list
> > > > chirp_users at intrepid.danplanet.com
> > > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > >
> > >
> > >
> > > ------------------------------
> > >
> > > Message: 4
> > > Date: Wed, 21 May 2014 08:34:46 -0500
> > > From: W Paul Mills <AC0HY at WPMills.com>
> > > Subject: Re: [chirp_users] Summer Project : transcoding CHIRP
> > > To: chirp_users at intrepid.danplanet.com
> > > Message-ID: <537CAB76.9090209 at WPMills.com>
> > > Content-Type: text/plain; charset=ISO-8859-1
> > >
> > > Not exactly true. With Windows 8 Prolific has announced that certain
> > > common chips will not be supported at all, and they seem to be getting
> > > better at preventing the old drivers from working. I have a genuine
> > > ICOM cable that recently fell victim to this.
> > >
> > > On 05/20/2014 10:54 AM, Niklas Johnson wrote:
> > > > Its wrong only if you have a 'counterfeit' Prolific chip, the most
> > > > recent driver revisions that Prolific themselves provided to
> > > > Microsoft detects and disables the non-genuine variants. Prolific
> > > > is protecting their market share and IP, and Microsoft was
> > > > providing a certified manufacturer supplied driver.
> > > >
> > > >
> > > > On Tue, May 20, 2014 at 8:41 AM, Pete Mackie <pete at seaquest.com
> > > > <mailto:pete at seaquest.com>> wrote:
> > > >
> > > > Except starting with Mac OS X Mavericks Apple is providing an O/S
> > > > built in USB to serial driver. I am using the Apple provided USB
> > > > to serial driver with CHIRP with zero problems.
> > > >
> > > > Windows has provides an O/S built in USB serial driver. The
> > > > dilemma is the stupid Microsoft thinks they should automatically
> > > > provide the latest O/S built in USB serial driver. And that is
> > > > absolutely the wrong thing to do if you are using a Prolific USB /
> > > > serial cable.
> > > >
> > > > Pete
> > > >
> > > > On May 20, 2014, at 8:17 AM, Andrew <ziltro at ziltro.com
> > > > <mailto:ziltro at ziltro.com>> wrote:
> > > >
> > > >>
> > > >> The drivers for certain USB/serial adapter cables will still be
> > > >> required, and they seem to be the main thing causing problems on
> > > >> Windows and Mac OS.
> > > >>
> > > >
> > > >
> > > > _______________________________________________ chirp_users mailing
> > > > list chirp_users at intrepid.danplanet.com
> > > > <mailto:chirp_users at intrepid.danplanet.com>
> > > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > > >
> > > >
> > > >
> > > >
> > > > --
> > > >
> > > > Best regards,
> > > >
> > > > Niklas Johnson / Tech Rugged Radios 951 E. Grand Avenue Arroyo
> > > > Grande, CA 93420 toll free (888) 541-7223 local (805) 541-1696
> > > >
> > > > Follow Rugged Radios at: Rugged Radios
> > > > <http://www.ruggedradios.com/> Facebook
> > > > <http://www.facebook.com/rugged.radios> Instagram
> > > > <http://instagram.com/ruggedradios> YouTube
> > > > <http://www.youtube.com/ruggedradios> Twitter
> > > > <https://twitter.com/ruggedradios>
> > > >
> > > >
> > > > _______________________________________________ chirp_users mailing
> > > > list chirp_users at intrepid.danplanet.com
> > > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > > >
> > >
> > >
> > > --
> > > /*************************************************
> > > * Amateur Radio Station AC0HY *
> > > * W. Paul Mills SN807 *
> > > * Assistant EC Alpha-1 ARES Shawnee/Wabunsee, KS *
> > > * President Kaw Valley Amateur Radio Club *
> > > *************************************************/
> > >
> > >
> > > ------------------------------
> > >
> > > _______________________________________________
> > > chirp_users mailing list
> > > chirp_users at intrepid.danplanet.com
> > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > >
> > >
> > > End of chirp_users Digest, Vol 65, Issue 16
> > > *******************************************
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140522/f6fab6fd/attachment-0001.html 
> 
> ------------------------------
> 
> Message: 12
> Date: Thu, 22 May 2014 05:43:52 -0400
> From: Jim Unroe <rock.unroe at gmail.com>
> Subject: Re: [chirp_users] Change language from Chinese to
> 	English-Baofeng	UV-5R
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
> 	<CADnO8U5o2XdLNXBgkkt-r-DvQHCpK17sCuyajFe5VALcqwoJsA at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
> 
> Mike,
> 
> It would seem that you used menu 40 to RESET your radio prior to adding
> your repeater frequency. Menu 14 (VOICE) on the original UV-5R was either
> ON or OFF. The default after a RESET is ON. A UV-5R with BFB251 firmware or
> later, menu 14 has the choices of OFF, ENG (English) and CHI (Chinese). The
> defalut after a reset is CHI.
> 
> Take a look at the  "Reference for UV-5R Menus"
> http://www.miklor.com/uv5r/ (scroll down to "Menu Definitions - Detailed")
> 
> So as others have already pointed out, you can use menu 14 to take care of
> this using the radios's keypad. To do this using CHIRP you would download
> from your radio, access the Settings->Advanced Settings menu and set Voice
> to English and then upload the change back to your radio.
> 
> Jim KC9HI
> 
> 
> On Wed, May 21, 2014 at 11:27 PM, Michael Clark <mpjjm0101 at msn.com> wrote:
> 
> > When entering my one and only repeater frequency, offset, TX, RX, etc.,
> > the language changed from English to Chinese.  How do I change it back to
> > English?  Can't seem to find the commands in the booklet.  Radio receives
> > and transmits fine.
> >
> > Mike in Burien, KG7LRF, new technician class licensee
> >
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140522/2810ddf0/attachment-0001.html 
> 
> ------------------------------
> 
> Message: 13
> Date: Thu, 22 May 2014 11:48:00 -0400
> From: Milton <thecanesvenatici at gmail.com>
> Subject: Re: [chirp_users] Cable
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
> 	<CAChAUonUgTLy=Nj6+OTvVib8bxbbLouo1jHc=c0Z3qJ=L=K4Dw at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
> 
> You should be using the driver at www.miklor.com whether you run XP or Win
> 7 / 8.
> 
> 
> On Wed, May 21, 2014 at 2:10 AM, Nate Perkins <perkins.nc at gmail.com> wrote:
> 
> > I would suggest just tossing the idea of using whatever driver you got on
> > the supplied CD. I ordered a cable and disc set off of Amazon, threw the
> > disc out, downloaded everything off of CHIRP, plugged in my cable, and it
> > went flawless. Not one hitch. This was a Baofeng UV-82. CHIRP rocks!
> >
> >
> > Nate, KL3NP
> > Nome, Alaska
> >
> > On May 20, 2014, at 9:26 PM, Richard Mogford wrote:
> >
> > > I am new to this list and probably am making mistakes that are already
> > well
> > > known!
> > >
> > > I bought a cheap cable running the 2303 chip, which I found later is not
> > so
> > > good.
> > >
> > > The drivers on the supplied CD seem to work OK, but when I go to use
> > CHIRP,
> > > I get an "Error Occurred" message saying "could not open port COM3:
> > [Error
> > > 2] The system cannot find the file specified."
> > >
> > > Is there anything I can try here, or should I just shop for a better
> > cable?
> > >
> > > Richard
> > >
> > > _______________________________________________
> > > chirp_users mailing list
> > > chirp_users at intrepid.danplanet.com
> > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140522/edc864f8/attachment-0001.html 
> 
> ------------------------------
> 
> Message: 14
> Date: Thu, 22 May 2014 13:20:22 -0400
> From: "John LaMartina" <JohnLa at usa.net>
> Subject: Re: [chirp_users] Cable
> To: "'Discussion of CHIRP'" <chirp_users at intrepid.danplanet.com>
> Message-ID: <003e01cf75e2$1d792110$586b6330$@net>
> Content-Type: text/plain; charset="utf-8"
> 
> Correct drivers can be found at: http://www.miklor.com/COM/UV_Drivers.php
> 
> John K3NXU
> http://www.miklor.com
> 
> 
> 
> From: chirp_users-bounces at intrepid.danplanet.com [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Milton
> Sent: Thursday, May 22, 2014 11:48 AM
> To: Discussion of CHIRP
> Subject: Re: [chirp_users] Cable
> 
> You should be using the driver at www.miklor.com whether you run XP or Win 7 / 8. 
> 
>  
> 
> On Wed, May 21, 2014 at 2:10 AM, Nate Perkins <perkins.nc at gmail.com> wrote:
> 
> I would suggest just tossing the idea of using whatever driver you got on the supplied CD. I ordered a cable and disc set off of Amazon, threw the disc out, downloaded everything off of CHIRP, plugged in my cable, and it went flawless. Not one hitch. This was a Baofeng UV-82. CHIRP rocks!
> 
> 
> Nate, KL3NP
> Nome, Alaska
> 
> 
> On May 20, 2014, at 9:26 PM, Richard Mogford wrote:
> 
> > I am new to this list and probably am making mistakes that are already well
> > known!
> >
> > I bought a cheap cable running the 2303 chip, which I found later is not so
> > good.
> >
> > The drivers on the supplied CD seem to work OK, but when I go to use CHIRP,
> > I get an "Error Occurred" message saying "could not open port COM3: [Error
> > 2] The system cannot find the file specified."
> >
> > Is there anything I can try here, or should I just shop for a better cable?
> >
> > Richard
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> 
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> 
>  
> 
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140522/54326874/attachment-0001.html 
> 
> ------------------------------
> 
> Message: 15
> Date: Thu, 22 May 2014 10:39:14 -0700
> From: Richard Mogford <rchrdm at earthlink.net>
> Subject: Re: [chirp_users] Cable
> To: JohnLa at usa.net, Discussion of CHIRP
> 	<chirp_users at intrepid.danplanet.com>
> Message-ID: <DCF460DF-87B2-4317-8BA7-4CE3F9184B3C at earthlink.net>
> Content-Type: text/plain; charset="us-ascii"
> 
> Thanks.  I did get the cable working using a driver from www.409shop.com (as suggested in the CHIPR documentation).
> 
> Richard
> 
> 
> On May 22, 2014, at 10:20 AM, "John LaMartina" <JohnLa at usa.net> wrote:
> 
> > Correct drivers can be found at: http://www.miklor.com/COM/UV_Drivers.php
> > 
> > John K3NXU
> > http://www.miklor.com
> > 
> > 
> > 
> > From: chirp_users-bounces at intrepid.danplanet.com [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Milton
> > Sent: Thursday, May 22, 2014 11:48 AM
> > To: Discussion of CHIRP
> > Subject: Re: [chirp_users] Cable
> > 
> > You should be using the driver at www.miklor.com whether you run XP or Win 7 / 8.
> >  
> > 
> > On Wed, May 21, 2014 at 2:10 AM, Nate Perkins <perkins.nc at gmail.com> wrote:
> > I would suggest just tossing the idea of using whatever driver you got on the supplied CD. I ordered a cable and disc set off of Amazon, threw the disc out, downloaded everything off of CHIRP, plugged in my cable, and it went flawless. Not one hitch. This was a Baofeng UV-82. CHIRP rocks!
> > 
> > 
> > Nate, KL3NP
> > Nome, Alaska
> > 
> > On May 20, 2014, at 9:26 PM, Richard Mogford wrote:
> > 
> > > I am new to this list and probably am making mistakes that are already well
> > > known!
> > >
> > > I bought a cheap cable running the 2303 chip, which I found later is not so
> > > good.
> > >
> > > The drivers on the supplied CD seem to work OK, but when I go to use CHIRP,
> > > I get an "Error Occurred" message saying "could not open port COM3: [Error
> > > 2] The system cannot find the file specified."
> > >
> > > Is there anything I can try here, or should I just shop for a better cable?
> > >
> > > Richard
> > >
> > > _______________________________________________
> > > chirp_users mailing list
> > > chirp_users at intrepid.danplanet.com
> > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > 
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >  
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> 
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140522/5f6ff1f4/attachment-0001.html 
> 
> ------------------------------
> 
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> 
> 
> End of chirp_users Digest, Vol 65, Issue 17
> *******************************************
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140523/f5ecc2c8/attachment.html 


More information about the chirp_users mailing list