[chirp_users] Baofeng UV-5RA

[Richard Mogford]

To answer my own question from earlier today, I accidentally found the
Settings tab.  After you set up the radio and save a set of repeater sites,
the Settings tab seems to be available to configure the radio.

Richard

-----Original Message-----
From: chirp_users-bounces at intrepid.danplanet.com
[mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Richard
Mogford
Sent: Wednesday, May 21, 2014 5:00 PM
To: Discussion of CHIRP
Subject: Re: [chirp_users] Baofeng UV-5RA

By the way, the provided earpiece also likes this procedure.  When I first
plugged it in, the radio did strange things and I could not hear anything in
the earpiece.  If I plug the earpiece in and THEN turn the radio on, it
works fine.

Richard


On May 21, 2014, at 1:25 PM, Richard Mogford <rchrdm at earthlink.net> wrote:

> I noticed that too at first.  Try turning off the radio, plug the cable
into the radio, then turn it on.  The radio may also be affected by whether
the USB cable is set up properly, with a driver, etc.
> 
> Richard
> 
> 
> On May 21, 2014, at 1:03 PM, Jack Speer <speerj at buck.com> wrote:
> 
>> Transceiver stays in transmit once I plug in the programming cable to 
>> the USB port.
>> 
>> Ideas?
>> 
>> Help please.
>> 
>> 
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> 
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users

_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users