[chirp_users] Programing a Baofeng UV-82 with Chirp on osx 10.9.2

Thu May 15 16:35:11 PDT 2014

The installer will uninstall other versions of the driver.

On Thu, May 15, 2014 at 4:21 PM, Marthijn Soesbergen <
marthijnsoesbergen at gmail.com> wrote:

> Christian,
>
> I have used the driver from the Miklor site that was suggested earlier.
> Maybe we have a different MBP but a different programming cable for sure.
> My cable is unmarked and just black. If you want me to I can send a picture
> later on. I'm not at home right now.
>
> Regards,
> Marthijn
>
> Verstuurd vanaf mijn iPhone
>
> Op 15 mei 2014 om 09:24 heeft Christian Schwarz <
> coffeeisallineed at gmail.com> het volgende geschreven:
>
> I would ask the same question. I did install the driver that was linked by
> Milton. I did not have to do a right click to install but I did it anyway.
> The system report however displays the same information as before:
>
> *USB-Serial Controller:*
>
>   Product ID: 0x2303
>   Vendor ID: 0x067b  (Prolific Technology, Inc.)
>   Version: 3.00
>   Speed: Up to 12 Mb/sec
>   Manufacturer: Prolific Technology Inc.
>   Location ID: 0xfa130000 / 6
>   Current Available (mA): 500
>   Current Required (mA): 100
>
> The install routine gave me the message that everything was installed just
> fine and I restarted the machine before creating the system report. Results
> in Chirp remain the same exactly. I don’t know if this has anything to tell
> me, but the driver I downloaded only specifies up to osx 10.8.
>
> Cheers
> Chris
>
> btw. does one see his own postings in the email list? I replied once, but
> am not sure I got through. I just hit the reply button in mail.app.
>
> thx
>
>
>
>
> On May 15, 2014, at 5:07 AM, Kyle Johnston <Kyle at KyleJohnston.net> wrote:
>
> Do I need to uninstall the Prolific driver before installing the generic
> version?
>
> I just purchased a Baofeng BF-F8, and have also been unable to get CHIRP
> to download from the radio using a Baofeng branded cable.
>
>
> God Bless,
> Kyle Johnston
> KyleJohnston.net <http://kylejohnston.net/>
> Animis Opibusque Parati pro Soli Deo!
>
>
> On Wed, May 14, 2014 at 4:42 PM, Milton <thecanesvenatici at gmail.com>wrote:
>
>>
>> http://chirp.danplanet.com/projects/chirp/wiki/MacOS_Tips#Generic-PL-2303-cables-counterfeit-andor-Generic
>>
>>
>> Get the Generic driver package. You have to right click to install to get
>> around the Mavericks install nanny that
>> won't let you double click to start the install on a package not signed
>> by Apple.
>>
>>
>> On Wed, May 14, 2014 at 12:34 PM, Christian Schwarz <
>> coffeeisallineed at gmail.com> wrote:
>>
>>> Hi Marthijn,
>>>
>>> the cable I use is this:
>>> http://ecx.images-amazon.com/images/I/41iI3L%2BXoeL.jpg, at least from
>>> its appearance.
>>> Sure, send me your driver. I’ll try anything once. Do you know if I need
>>> to unload the current driver…and in case I have to, how I do it? Sorry for
>>> the noob questions.
>>>
>>> Cheers,
>>> Chris
>>>
>>> On May 14, 2014, at 5:32 PM, Marthijn Soesbergen <
>>> marthijnsoesbergen at gmail.com> wrote:
>>>
>>> Christian,
>>>
>>> Ik using a UV-5R and I program it with the same driver. If you want me
>>> to I can send you my driver and see if that works for you. Are you using
>>> the Kenwood style cable?
>>>
>>> Regards,
>>> Marthijn Soesbergen
>>>
>>> Verstuurd vanaf mijn iPhone
>>>
>>> Op 14 mei 2014 om 17:01 heeft Christian Schwarz <
>>> coffeeisallineed at gmail.com> het volgende geschreven:
>>>
>>> Hi everybody,
>>>
>>> I’d like to know, if anybody managed to program the UV-82 using chirp
>>> (or the daily build 20140428) on osx 10.9.2. I read that one might or might
>>> not have to disable apple’s own driver for FTDI chipset. I’ve been
>>> googleing the topic for a few days now and have not found a way to make it
>>> work on my mbp. The system report will tell me that a USB-Serial Controller
>>> is there:
>>>
>>> *USB-Serial Controller:*
>>>
>>>   Product ID: 0x2303
>>>   Vendor ID: 0x067b  (Prolific Technology, Inc.)
>>>   Version: 3.00
>>>   Speed: Up to 12 Mb/sec
>>>   Manufacturer: Prolific Technology Inc.
>>>   Location ID: 0xfa130000 / 6
>>>   Current Available (mA): 500
>>>   Current Required (mA): 100
>>>
>>> When I try to "download from radio” I have four choices in a dropdown
>>> menu, each of which will give me an error message:
>>>
>>> - /dev/cu.Bluetooth-Incoming-Port error: An error has occurred - Radio
>>> did not respond
>>> - /dev/cu.Bluetooth-Modem error: An error has occurred - could not open
>>> port /dev/cu.Bluetooth-Modem: [Errno 16] Resource busy:
>>> '/dev/cu.Bluetooth-Modem'
>>> - /dev/cu.NoZAP-PL2303-000013FA error: Radio did not respond
>>> - /dev/cu.usbserial  error: Radio did not respond
>>>
>>> Any ideas? I am using the USB programming cable from Baofeng, that came
>>> with the radio.
>>>
>>> btw. under windows7 (installed on the mbp) it works like a charm.
>>>
>>> Cheers,
>>> Chris
>>>
>>>
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users at intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users at intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>
>>>
>>>
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users at intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>
>>>
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>
>>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140515/0cf39eaa/attachment.html 