[chirp_users] Baofeng UV-82 Offset

[MCH]

Any chance the Anytone 3318-A will be one of those radios in the future?

Joe M. 

On May 14, 2014, at 10:01 AM, John LaMartina <JohnLa at usa.net> wrote:

> Before uploading to CHIRP you must create an initial template by doing a Download From Radio. 
> CHIRP supports over 60 model radios and needs to know which radio it is programming. 
> Make updates to the template and Upload To Radio. 
> 
> This can be found at http://www.miklor.com/UV5R 
> In the software section. 
> 
> I hope this helps.
> 
> John
> http://www.miklor.com
> 
> 
> Sent via iPhone6
> 
> On May 14, 2014, at 9:04 AM, Adam Brady <adamtbrady at cassiausa.com> wrote:
> 
>> Hello and thank you to all who have given their experience here.  The issue I am having is that on my CHIRP I have the OFFSET at .600, and the DUPLEX either a + or -.  However when I upload this to my radio it does not take the settings.  My radio reads OFFSET 00.000 and DUPLEX “none”.  I just finished uninstalling, and reinstalling, CHIRP.  When I did my initial upload from the radio the settings in CHIRP show the correct OFFSET and DUPLEX in the radio.  I tried to find this already reported, but did not.
>>  
>>  
>> Adam T. Brady
>> Cassia Engineered Products Corp.
>> 1013 North Parsons Ave.
>> Brandon FL 33510
>> Online: CASSIAUSA.COM
>> E-mail : adamtbrady at cassiausa.com
>> Office (813) 643 9696
>> Cell      (813) 967 3925
>>  
>>  
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140514/889fb8f4/attachment.html