[chirp_users] How-to IC-2200H

[Brad NK8J]

Make sure your drivers are correct and that you have CHRIP set to the
correct COM Port. when you have the cable plugged in go to Device manager
and then select ports and prolithic port and see what com port it is on and
then set it in chirp.  

 

Brad NK8J

 

From: chirp_users-bounces at intrepid.danplanet.com
[mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of W8RGB Gary
Sent: Thursday, May 08, 2014 3:41 PM
To: Discussion of CHIRP
Subject: Re: [chirp_users] How-to IC-2200H

 

I did try both latest version and the the latest Daily Build   {;-(

    73  Gary  W8RGB

 

____________________________________________________________
The #1 Worst Carb Ever?
Click to Learn #1 Carb that Kills Your Blood Sugar (Don't Eat This!)
http://thirdpartyoffers.juno.com/TGL3131/536c1e84c4cb71e833d1dst03duc
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140508/ca94ff0c/attachment.html