[chirp_users] FT 60R

Milton Hywatt mhywattt at yahoo.com
Sat Mar 1 18:18:34 PST 2014


If you are using Windows 7 the recommended driver is version 

3.2.0.0 which will work with all Prolific 2303 chip be they counterfeit
or genuine. www.miklor,com has the driver. Try replacing it even though
the driver you are using works partially. 



________________________________
 From: G T <w7gus at hotmail.com>
To: "chirp_users at intrepid.danplanet.com" <chirp_users at intrepid.danplanet.com> 
Sent: Saturday, March 1, 2014 9:03 PM
Subject: [chirp_users] FT 60R
 


Greetings
I believe this may have been answered however I could not find a copy of the email.
I have a FT 60 R I'm using CHIRP cable form Amazon, it has a model TW-PCMYA1U  and a number PCY1004 the Prolific driver is 3.4.62.293.
Following he procedure It will read from the radio, populated the CHIRP spread sheet but then on the upload it fails. A message appears "Failed to communicate with the Radio. Radio did not respond" I tried it a few times as per the video on You tube. Do I need different driver?
TNX
73
W7GUS

 

_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140301/4cb7b5cb/attachment-0002.html 


More information about the chirp_users mailing list