[chirp_users] Baofeng UV-5R Frequency mod
Frederick McDougall
Sun Mar 30 12:40:05 PDT 2014
I have not been able to discover this in all of the manual v ersions I have found. May not be possible.
Fred VA6FRM
Sent from Samsung Mobile
<div>-------- Original message --------</div><div>From: Laine <lainegadd at gmail.com> </div><div>Date:2014-03-30 01:35 (GMT-07:00) </div><div>To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com> </div><div>Cc: Discussion of CHIRP <chirp_users at intrepid.danplanet.com> </div><div>Subject: Re: [chirp_users] Baofeng UV-5R Frequency mod </div><div>
</div>Thanks for the tip Fred how do I set the fm frequencie to what I want ?
Sent from my iPhone
On 30 Mar 2014, at 3:41 pm, Frederick McDougall <frmcdo at gmail.com> wrote:
Probably can't as that freq is outside the design of the pass band. Might try tbe fm section to see if it will rx at that freq but no tx
Fred VA6FRM
Sent from Samsung Mobile
-------- Original message --------
From: Laine
Date:2014-03-28 23:22 (GMT-07:00)
To: Discussion of CHIRP
Subject: Re: [chirp_users] Baofeng UV-5R Frequency mod
Thanks for the advice Jim , but it's not picking up any transmissions on
Vhf 78.650 so it looks like it won't work
Cheers
Laine
Sent from my iPhone
On 28 Mar 2014, at 10:00 am, Jim Unroe <rock.unroe at gmail.com> wrote:
On Thu, Mar 27, 2014 at 6:06 PM, Laine <lainegadd at gmail.com> wrote:
Hey all
I want to try and put in the frequency
78.6500 into my uv 5re
What's the process ? Using the keypad to enter the number and set the STEP ?
Laine,
Here is what I would do.
In CHIRP with a valid template loaded for your radio...
in the Settings -> Other menu do the following
1. set "VHF lower limit" = 78
2. set "VHF upper limit" = 173 (not 174 as you might think)
in the Settings -> Work Mode Settings menu do the following
1. set "Display" = A
2. set "VFO/MR Mode" = Frequency
3. set "VFO A Frequency" = 173.990000
4. set "VFO A Tuning Step" = 10.0
5. (optional) make any other VFO A settings changes
now upload these settings to your radio. after the upload completes your radio will be in frequency mode with the upper display selected and tuned to 173.990 MHz.
using the radio keypad
1. tap the [UP] arrow key ~66 times (or press and hold) until the radio is tuned to 78.650 MHz.
2. (optional) write this frequency to an empty channel using menu 27
Jim KC9HI
Jim KC9HI
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140330/2f0d7443/attachment.html
More information about the chirp_users
mailing list