[chirp_users] Transmit activated when trying to do a transfer (was Re: Another way Chirp can be tripped up by the OS)

[Milton Hywatt]

What is your operating system and cable driver version? Stephen was able to 
roll back his Prolific driver to 3.2.0.0 for Windows 7 and now the PTT 
does not activate when using the software. 




________________________________
 From: Michael Rathbun <KL7F at kl7f.us>
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com> 
Sent: Thursday, March 27, 2014 11:51 PM
Subject: [chirp_users] Transmit activated when trying to do a transfer (was	Re: Another way Chirp can be tripped up by the OS)
 

On Thu, 27 Mar 2014 14:08:04 -0400, Stephen Hersey <n1xnxham at gmail.com>
wrote:

>Incidentally, is it normal for the UV-5R to key up when the serial cable is
>present? I'm going to make a practice of always having a dummy load
>connected when programming this radio.

It is the case here, with two (non-counterfeit) cables.  The rig keys up as
soon as the software (any software) activates the serial port.

I have identified two solutions:

1.  Connect the unit to the cable (power off!), prepare Chirp so that you
only need to click the OK button in order to start the transfer, power the
unit on, and click the OK button as soon as the rig's display lights up.
The transfer begins and the transmitter doesn't turn on.

2.  Put in a receive-only channel (I have local NWS in channel 1, with
transmit disabled), set the rig to that channel, plug stuff in, run Chirp,
everybody happy.

mdr KL7F
-- 
   Sometimes half-ass is exactly the right amount of ass.
       -- Wonderella


_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140328/92830f40/attachment.html