[chirp_users] Thanks Jim

Jim Unroe rock.unroe at gmail.com
Mon Jun 30 05:20:26 PDT 2014


Chris,

Assuming that you have a programming cable with a Prolific (type) chip, you
will need to install (or make sure that Windows XP installs) the v2.0.2.1
driver. A newer driver may not be compatible with the chip. Visit the
following website for a guide (it was written for Windows 7 but the idea is
the same) and a link to the driver.

http://www.miklor.com/COM/UV_Drivers.php

Jim KC9HI

On Mon, Jun 30, 2014 at 12:43 AM, Christian Peeples <chris_peeples at yahoo.com
> wrote:

> Jim:
>
>      Thanks.  You were right, I am using Windows XP and got CHIRP to
> open.  I had checked cherpw, but did not recognize what popped up.  I am
> now trying to get my computer to recognize my Baofeng, but I think that is
> a hardware problem.  I'll work on it some more if I have time during the
> week.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140630/366c6a25/attachment-0002.html 


More information about the chirp_users mailing list