[chirp_users] Another question

[Dr. Whit Woodard]

No, John.  I just downloaded what was on the radio when I bought it.  There are many columns that ask for information that is not available from the various repeaters and don’t seem to have a bearing on the use.  Things like “cross mode” and “tone sql” and “DTCS code” and DTCS Rx code” and etc.  Didn’t realize I could make a different template, but what if I were to leave off something important?  How is one to know?

Whit
On Jul 21, 2014, at 4:54 PM, John LaMartina <JohnLa at usa.net> wrote:

> Whit, 
> I'm curious.  Did you create an initial template?
> 
> CHIRP supports over 60 different model transceivers.
> You must First create a template by performing  a Download from Radio so CHIRP know the model and parameters of your radio.
> Make your changes and updates to the template, then perform an Upload to Radio.
> 
> Hope this helps . . .
> 
> John K3NXU
> http://www.miklor.com
> 
> 
> -----Original Message-----
> From: chirp_users-bounces at intrepid.danplanet.com [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Dr. Whit Woodard
> Sent: Monday, July 21, 2014 7:26 PM
> To: chirp_users at intrepid.danplanet.com
> Subject: [chirp_users] Another question
> 
> I saved my template after uploading it to the radio and I need to make some changes, but I can't seem to access the template when I
> open it.  
> Is it not possible to amend the settings from the saved copy and then upload it to the radio??
> 
> Thanks,
> Whit
> k3wb
> 
> 
> 
> 
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users