[chirp_users] BaoFeng BF-F8+

[John LaMartina]

Roger,

Here is a list of all variants of the UV5R series / BF-F8 from the CHIRP page.
http://chirp.danplanet.com/projects/chirp/wiki/Baofeng_UV5R_Variants

If you run into and problems with Cable Drivers, this link may also assist.
http://www.miklor.com/UV5R

Note: CHIRP supports over 60 different model transceivers.
You must first create a template by performing  a Download from Radio.
Make your changes and updates to the template, then perform an Upload to Radio.

Hope this helps . . .

John K3NXU
http://www.miklor.com



From: chirp_users-bounces at intrepid.danplanet.com [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Roger Dillon
Sent: Sunday, July 20, 2014 1:39 AM
To: chirp_users at intrepid.danplanet.com
Subject: [chirp_users] BaoFeng BF-F8+

 

Has anybody gotten the CHIRP software to work on a BaoFeng BF-F8+.  
It doesn't show up in the BaoFeng dropdown box in the program.   I can't get it to "talk" to my radio.

 

73's

 

Roger 

KJ6IEZ 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140720/ca361ec6/attachment.html