[chirp_users] Issue with UV-5rv2+ programming

[Forrest]

Not sure what happened in your particular case, but the instructions do say to be sure and be on an unused channel before proceeding.  Not that you were not, but it’s worth mentioning.

Forrest

On Jul 3, 2014, at 12:01 PM, Richard Bailey <kb5jbv at gmail.com> wrote:

> My radio transmits for a minute or so when I plug it in and chirp won't write. If I wait for it to end transmitting it writes ok. Chased that problem for an hour yesterday. Make sure your uv5r is not transmitting
> 
> Richard Bailey KB5JBV 
> 214-264-1066
> kb5jbv at gmail.com
> 
> Sent from my iPhone
> 
>> On Jul 3, 2014, at 11:41 AM, Rick Myers <sark9handler at gmail.com> wrote:
>> 
>> Trying to use chirp to program new HTs. Reads radio ok, but error message of radio won't respond to write to radio. Happens on both radios. If I use the VIP software (talk about convoluted!) it will write to the radio. I just did 1 local repeater channel thru VIP so see if it would work.
>> 
>> Any thoughts or ideas I can try?
>> 
>> Thanx
>> RIck
>> 
>> -- 
>> Rick Myers
>> KD0THD
>> SAR Manager, Planner, K9 Handler, Instructor, and Ground Pounder
>> 
>> Member, Board of Directors, Canine Search and Recovery, Inc.
>> Founder and Lead Trainer, Three Rivers Area Search and Rescue Council
>> Instructor, Illinois SAR Council
>> Member, National Search Dog Alliance
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users