[chirp_users] Offset

Jens J. kd4tjx at yahoo.com
Thu Jan 23 18:41:38 PST 2014



Hi JL,
Not sure what you are seeing.
In chirp, the frequency column is the rx fre.
If duplex column is:
(none): then tx freq is same as rx freq. This is "simplex"
- or +: tx freq is offset from the rx freq by the amount in offset column
split: the offset column contains the exact tx freq
off:  (if the radio supports it), tx should be disabled (or set to something that is effectively disabled, like 0.000 MHz)

Does that make sense? If you are not seeing the same, please let us know what radio you are trying to program.


________________________________
 From: J L <cm267 at hotmail.com>
To: . <chirp_users at intrepid.danplanet.com> 
Sent: Thursday, January 23, 2014 8:23 PM
Subject: [chirp_users] Offset
 


 
How do I set the transmit frequency offset higher (+) or lower (-) than the receive frequency? Or must I use the actual frequency as the offset?

operatorj

_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140123/752d171f/attachment-0002.html 


More information about the chirp_users mailing list