[chirp_users] FT-817 Clone Rx error

IZ3GME Marco iz3gme.marco at gmail.com
Thu Jan 23 15:24:46 PST 2014


Hi Michael
my suspect is that you have a program, other then chirp, writing to serial port. To confirm this you can put your ft817 in clone and press C button without running chirp.
If the radio still immediately says clone error you have to investigate which program is using the serial port.
To be sure there's not a problem with radio itself you can test again with the data cable disconnect.
The radio should sit there for a while waiting for clone rx.

Let me know you test results.

73 de IZ3GME Marco

On Wed, 22 Jan 2014 23:42:23 +0000
Michael Kent <michael.chirp at pyro.so> wrote:

> I've used Chrip sucessfully with a Baofeng for a while, but I'm running 
> in to issues with my F-817.
> 
> I've recieved an image ok from the radio buy putting into clone mode 
> hitting a and downloading the image. I've then edited the image. As soon 
> as I press the C button on the radio for upload it just says "CLONE 
> MODE" "Error" .
> 
> Has anyone else had the same issue?
> 
> Thanks
> 
> M6OSI
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users



More information about the chirp_users mailing list