[chirp_users] FT8900 cable

[Mike Miller]

RX and TX are on the same line, pin 3 which is also the  data 
jack PTT line. It should work if your cable has TTL level data. 
I use an Icom CI-V cable with an adapter for the 6 pin mini-din.

73
Mike kc9doa

On 27 Jan 2014 at 20:14, Milton Hywatt wrote:

> Does anyone know if the cable for this radio has seperate TX
> and RX data 
> Pins? I want to use a spare cable for an Anytone AT5888UV which
> has TX
> and RX combined. I thought I might just put that signal wire on
> both the
> RX and TX pins of the Yaesu's mini 6 pin plug if it has
> separates. 
> 
> Will that work, before I start tearing cables apart?
>