[chirp_users] Programming Yaesu FT7900

Tom Hayward esarfl at gmail.com
Wed Feb 12 10:40:57 PST 2014


On Tue, Feb 11, 2014 at 9:15 PM, Dave Cavanaugh <cavanadd at frontier.com> wrote:
> I am having trouble programming my radio via the programming cable.
>
> I can get the radio into Clone mode by pressing the MHz PRI button on
> startup.  However, it won't go into TX or RX by pushing the LOW/ACC or
> V/M MW button as described in the "cloning" section of the manual.

Sounds like you're missing a step to put it into clone mode. From the manual:

"3. Rotate the DIAL knob on each radio to select (F-7 CLONE), then
press and hold in the
[ BAND ( SET )] key. The display will disappear for a moment, then the
"CLONE" notation will appear on the display."


Tom KD7LXL



More information about the chirp_users mailing list