[chirp_users] win7 and win 8.1

[Milton Hywatt]

I don't own a TN D700 but it is a supported radio. The cable driver
if the cable uses a PL2303 chip, is the same version as Windows 7 (3.2.0.0)
I supposed any driver will work for FTDI based cables. Knowing all this,
you can be 99% certain your radio, Chirp will work in Windows 8.x
and it works in Windows 7. 

You can get the daily latest build of Chirp from here
http://trac.chirp.danplanet.com/chirp_daily/LATEST/

If it works with the daily build then you can just continue 
to use that build. I don't install every daily build that's advertised. 
Unless some new features have been added involving my radios. 






________________________________
 From: "ROLAN.CLARK at comcast.net" <ROLAN.CLARK at comcast.net>
To: chirp_users at intrepid.danplanet.com; leonard.keepers at comcast.net 
Sent: Wednesday, February 19, 2014 7:28 PM
Subject: [chirp_users] win7 and win 8.1
 


Dear  all,
 
Has anyone used the latest Chirp version with Win7 or Win8.1   to  download memory data from a Kenwood TM-D700  and made changes successfully?
 
Thanks for any consideration,
 
73 de rolan w3fdk 

_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140219/cb06bfa3/attachment.html