[chirp_users] Columns: Now you see them now you don't!

[Jim Unroe]

On Wed, Feb 12, 2014 at 7:48 PM, box5368 <box5368 at gmail.com> wrote:

> Some CHIRP "spreadsheets" show more columns than others.
>
> For example: tuning steps
>
> How do you control what columns are visible?
>

The available columns are a function of the CHIRP driver for each radio.
They are developed to (hopefully) match the capability of each radio that
they are written for. For example, the Baofeng UV-B5 does not require or
use tuning steps when storing memory channels. Therefor, the tuning steps
column is intentionally left out for this radio.

But on the other hand, the UV-B5 does support DTCS. However, if you think
will rarely be using DTCS, you can go to View -> Columns and untick the
three columns related to DTCS and they will no longer show in the memory
spreadsheet memory editor. You can then tick them again later if you decide
that you need to use them, or you can leave them hidden and use the
right-click edit menu to make those rare DTCS changes.

Jim KC9HI
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140212/87126cbb/attachment.html