[chirp_users] Baofeng UV-5RA cloning problem

[Dave]

I assume you can read from the radio, and have updated the read file then
tried to write it back.

Cheers Dave

On 1 January 2015 at 08:48, Tom Van de Bussche <tbussche at gmail.com> wrote:

> I have all ready have smart screen off and I have the Prolific version
> 3.2.0.0 driver installed and working.
>
> Tom KB3OA
>
> On Wed, Dec 31, 2014 at 3:37 PM, Jim Unroe <rock.unroe at gmail.com> wrote:
>
>> On Wed, Dec 31, 2014 at 2:49 PM, Tom Van de Bussche <tbussche at gmail.com>
>> wrote:
>> > When I try to clone my Baofeng UV-5RA, it starts the download and I
>> receive
>> > a "radio Refused to send block 0x0140" error.  I am running Chirp on
>> windows
>> > 8.1, and Chrip is 20141231.  firmware is BFB297.  Any ideas or
>> suggestions?
>> >
>> > Tom Van de Bussche
>> > KB3OA
>>
>> The first thing that I would recommend, if you haven't already, is
>> that you turn off the Window 8's SmartScreen feature.
>>
>> http://www.miklor.com/COM/UV_CHIRP.php#LoadingCHIRP
>>
>> The second thing would be that if the programming cable has a Prolific
>> type chip in it (look in Device Manager), then downgrade the
>> automatically installed driver to v3.2.0.0.
>>
>> http://www.miklor.com/COM/UV_Drivers.php
>>
>> Jim KC9HI
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20150101/4cd62398/attachment.html