tbloomingdale at gmail.com
Thu Aug 28 08:27:58 PDT 2014
Most communications issues between the radio and computer is the USB cord
drivers. If you have the FTDI chip branded cord it should be a plug and
play, as windows installs the drivers and most time it installs a correct
driver for that. Now if you are using a off brand or most times counterfeit
prolific chipped cord, with that I reccommend to reinstall the prolific
18.104.22.168 driver. Here is detailed instructions from the great site miklor.com
site for windows and mac. http://www.miklor.com/COM/UV_Drivers.php
Also it is recommended once you have the correct driver installed, is to
use the same usb port each time. The driver will not follow the cord if you
bounce around usb ports. Hope this helps. let me know your results.
On Thu, Aug 28, 2014 at 10:12 AM, Sarge ex 7thAF <0101.smd at gmail.com> wrote:
> New Troop here. I am very glad there is a Chirp.
> This UV5R is driving me up the walls. It took me awhile to get it
> programming with but then started working good. Then later it refused to
> program as it was working. I think it had something to do with shutting
> down my pc. Worked hard with many different trys and finally got
> programming working again seeminglt by deleting then reinstalling Chirp.
> Now programming has stopped working again. Says radio will not respond.
> So,deleted Chirp and reinstalled. That didnt work this time.
> Any advice much appreciated!
> Thanks in advance,
> Sarge KE5YPB, Lickskillet, Texas
> "All it takes for evil to triumph is for good men to do nothing."
> " Lets Roll " ---- Todd Beemer--- 9/11/01 --- American Hero
> Are you going to take a stand to help America in 2016 ?
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the chirp_users