[chirp_users] GT-3

Jim Unroe rock.unroe at gmail.com
Wed Aug 13 14:18:50 PDT 2014


On Wed, Aug 13, 2014 at 4:57 PM, w4grj <w4grj at satterfield.org> wrote:

> Tried using UV-5R setting on my new GT-3 but it does not communicate with
> the radio.
> Any suggestions?
>
> Thanks,
> Jack
> W4GRJ
>

1. Make sure you have a compatible driver installed. Programming cables
with Prolific chips almost always require you to use an older or patched
driver to be compatible.

Windows XP: V2.0.2.1
Windows Vista, 7, 8, 8.1: V3.2.0.0

http://www.miklor.com/COM/UV_Drivers.php

Mac OS X

http://chirp.danplanet.com/projects/chirp/wiki/MacOS_Tips (generic drivers)

Linux

Compatible drivers are often already installed. Give CHIRP Live CD a try
(you can "burn" it to a USB flash drive). Since the OS is Xubuntu Linux, if
this works with your programming cable and Windows or OS X doesn't work,
you have at least determined the problem is not your programming cable or
CHIRP.

2. Make sure the cable is fully plugged into the radio. This trips up a lot
of owners of the UV-5R (and variants like the GT-3).

http://www.miklor.com/COM/UV_ErrorMess.php#error1

Jim KC9HI
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140813/9090b086/attachment-0002.html 


More information about the chirp_users mailing list