[chirp_users] IC-2200H - error message when trying to download

Marcelo XQ6BQ xq6bq at qsl.net
Wed Aug 6 08:24:30 PDT 2014


Hi Rolan,

Thank you, I tried that too, didn't work either. I even reinstalled the
Prolific driver (the one provided with the cable).
Tried both procedures again: the one I described before and the simpler
that you suggested.
No luck yet :(

Thanks though!

73,

Marcelo XQ6BQ
xq6bq at qsl.net

---------- Forwarded message ----------
> From: ROLAN.CLARK at comcast.net
> To: chirp users <chirp_users at intrepid.danplanet.com>
> Cc:
> Date: Tue, 29 Jul 2014 20:54:19 +0000 (UTC)
> Subject: [chirp_users] IC-2200H - error message when trying to download
> (Marcelo XQ6BQ)Re: chirp_users Digest, Vol 67, Issue 25
>
> Rolan, W3FDK here,
>
>
>
> I used the speaker jack to 9 pin D connector  to  serial to USB  (FTDI )
> and  turned on the radio and on Chirp  >  Radio  and selected  Icom  and
> auto detect and it downloaded the memory data.
>
>
>
> The IC2200H  screen displayed CL  OUT  then back to normal display after
> download  and all the  memories and  DSTAR  data was there as far as I
> could tell.
>
>
>
> Maybe what was described in the trouble query is for rig to rig clone?
>
>
>
> I hope this helps,
>
>
>
> 73 de rolan w3fdk
>
>  ------------------------------
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Mon, 28 Jul 2014 16:47:05 -0400
> From: Marcelo XQ6BQ <xq6bq at qsl.net>
> Subject: [chirp_users] IC-2200H - error message when trying to
>         download
> To: chirp_users at intrepid.danplanet.com
> Message-ID:
>         <
> CADf52WZbLkxMm6P54fdY9kYjjmQ5ZnYFGWW4fDep-394_q-PWg at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Hello, maybe someone can give me some light...
> I was looking everywhere for an answer but found nothing, so apologies if
> this has been discussed before.
>
> Latest CHIRP, Windows 7, Prolific driver OK.
> Brand new USB (Prolific) cable for IC-2200H, connector to rig seems to fit
> well.
>
> I've used CHIRP with Baofeng UV-5R and Yaesu FT-60R, worked perfect.
>
> Now, when connecting IC-2200H to PC and trying to download memories, this
> message appears:
> An error has occurred
> Failed to communicate with the radio: Unexpected response from radio.
>
> I don't have a spare cable or another IC-2200H to check if the problem is
> there.
>
> Perhaps I'm not following the proper sequence to download data from this
> particular radio?
> 1) Connect cable to radio and to PC
> 2) Launch CHIRP
> 3) While pushing [M/CALL], turn power ON (?CLONE? appears on the radio's
> display)
> 4) Go to CHIRP's "Download from radio" menu but touch nothing yet
> 5) Push [S.MW ] on the radio. ?CL OUT? appears on the display.
> 6) Click OK to CHIRP dialog... Then it briefly shows the small "cloning"
> window and then the error message.
>
> Any suggestions?
>
> Thanks!!
>
> 73,
>
> Marcelo XQ6BQ
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140728/f8c265fa/attachment-0001.html
>
> ------------------------------
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140806/238a6f4b/attachment-0002.html 


More information about the chirp_users mailing list