[chirp_users] NC Hams using chirp

D.J.J. Ring, Jr. n1ea at arrl.net
Mon Apr 21 20:16:06 PDT 2014


There was a. live linux CD that had chirp on it that was all set up.

Linux is best because you don't need drivers, the live CD eliminates the
problems with Linux permissions and groups which sometimes snag the first
time Linux user.

Here is the Live CD link and important information on making a Live USB
from it.
http://sourceforge.net/projects/chirplivecd/files/?source=navbar

David N1EA
On Apr 21, 2014 10:39 PM, "dwayne rich" <drichnews at gmail.com> wrote:

> I went to the miklor site, my driver shows up as being a supported driver
> for a FTDI cable which I am using (driver version 2.10.0.0). I tried a
> different computer and still the same thing. So far I have tried two
> windows computers, a mac computer, and checked every suggestion I can find
> on the web (ftdi chip website, miklor etc) and the chirp mailing list. I
> have rebooted my computer several times. I have even performed a factory
> reset of the radio. Nothing I have tried has allowed chirp to talk to the
> radio. I am at a lost as to what could be the problem unless the cable
> could be bad. I have programmed the radio in the past with the RTSystems
> cable and software using their opc-478 cable and the icom 1797 cable. That
> is why I was hoping someone in the raleigh area of NC would happen to have
> both chirp and the IC-92AD functioning correctly, so I could try their
> computer and cable to see if it was the radio or if it was my cable and/or
> computer.
>
> Dwayne
>
>
> On Mon, Apr 21, 2014 at 8:44 PM, Milton <thecanesvenatici at gmail.com>wrote:
>
>> Dwayne go to www.miklor.com and take a look at their cable and
>> troubleshooting
>> guide. You can usually find info there that will actually solve your
>> problem. I've sent
>> many there and they usually got things sorted out. The Icom 91/92AD is
>> listed in the daily
>> build as supported so you may have a cable or driver issue. Roughly 80%
>> of communication
>> issues are driver oriented and Miklor will help you eliminate any driver
>> issue you might have.
>>
>>
>> On Mon, Apr 21, 2014 at 1:11 PM, Dwayne <drichnews at gmail.com> wrote:
>>
>>> Yes sir I verified the com settings and that the cable is fully seated.
>>>
>>> Dwayne
>>>
>>> > On Apr 21, 2014, at 11:33, "Brad NK8J" <nk8j at juno.com> wrote:
>>> >
>>> > Did you make sure to set the correct com port in the Chirp program to
>>> > coincide with the port that the cable is attached to  when hooked to
>>> the
>>> > computer? Did you also make sure the cable is plugged in all the way?
>>> >
>>> > Brad NK8J
>>> >
>>> > -----Original Message-----
>>> > From: chirp_users-bounces at intrepid.danplanet.com
>>> > [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of
>>> Dwayne
>>> > Sent: Monday, April 21, 2014 7:22 AM
>>> > To: of CHIRP Discussion
>>> > Subject: [chirp_users] NC Hams using chirp
>>> >
>>> > Any hams in the Raleigh NC area that are using chirp (preferably with
>>> Icom
>>> > 92ad) that could help me troubleshoot why I can't program the IC-92ad?
>>> >
>>> > Dwayne
>>> > _______________________________________________
>>> > chirp_users mailing list
>>> > chirp_users at intrepid.danplanet.com
>>> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> > ____________________________________________________________
>>> > What is Your Flood Risk?
>>> > Protect your home from floods. Get your flood risk profile today.
>>> > http://thirdpartyoffers.juno.com/TGL3155/535535e0965135de11cbmp03duc
>>> >
>>> > _______________________________________________
>>> > chirp_users mailing list
>>> > chirp_users at intrepid.danplanet.com
>>> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users at intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>
>>
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>
>>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140421/35613e0d/attachment-0002.html 


More information about the chirp_users mailing list