[chirp_users] IC92AD issues

Dwayne drichnews at gmail.com
Sun Apr 20 13:50:23 PDT 2014


I have used the 1797 in the past with a RTsystems cable to program the IC-92AD with the RTSystems software. I was never able to get it to program with the RTSystems cable using chirp even with some of the fixes posted on this mailing list. The problem with the 1799 cable  is that it uses a rs232 connector and I don't have a computer with the connection on it. I have since bought a cable with a FTDI chip in it but I am still not able to program it with Chirp. Looks like I may have to go back to using RTsystems software if I can't figure out why the software and radio aren't able to communicate. 

Dwayne

> On Apr 20, 2014, at 15:09, "Ted Wrobel" <twrobel at tacticaltech.com> wrote:
> 
> If I remember correctly you cannot program the 92 with the OPC1797 splitter
> cable. You need to use the "real" programming cable, which I think is an
> OPC-1799.
> 
> The pinout is (may be?):
> 
> IC-92AD Data Cable Pinout
> Pin#    Signal
> 1    Microphone
> 2    Power at 5 volts
> 3    Clone CPU
> 4    RS232C RX232
> 5    RS232C TX232
> 6    Ground
> 7    Speaker
> 8    Ground
> 9    OPTV
> 10    NC
> 11    NC
> 12    NC
> 
> 
> 
> 73
> Ted
> W1GRI
> 
> 
> -----Original Message-----
> From: chirp_users-bounces at intrepid.danplanet.com
> [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Dwayne
> Sent: Sunday, April 20, 2014 2:15 PM
> To: of CHIRP Discussion
> Subject: [chirp_users] IC92AD issues
> 
> I have a ic-92ad submersible with the waterproof mic/data connector on top
> of the radio. To program the radio I have the opc-1797 cable connected to
> the radio and then a USB cable (opc-478) with a 3.5mm plug that I purchased
> from KJ6ZWL that uses a FTDI chip. The cable drivers installed correctly.
> I'm using the latest version of chirp. But I just can't get the radio to
> talk to the chirp software. When I tell chirp to "download from radio" it
> comes up with 0.0000 under frequency and error under name for every location
> in the radio. If I type in a frequency and name for a location in chirp it
> doesn't update the radio. I tried to find a way to search the mailing list
> archives but couldn't find one. I have manually gone through all of the
> emails from the chirp list dealing with the IC92AD. Nothing in the emails
> seem to help me getting chirp and my IC92AD talking.  What am I doing wrong?
> 
> Dwayne
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1432 / Virus Database: 3722/6868 - Release Date: 04/19/14
> 
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users



More information about the chirp_users mailing list