[chirp_users] Baofeng UV-5R

Jim Unroe rock.unroe at gmail.com
Thu Apr 17 14:04:45 PDT 2014


On Thu, Apr 17, 2014 at 4:19 PM, Rick Craft <netslay3r at gmail.com> wrote:

> Wondering how to *remove* the Reverse feature in Channel Mode, by short
> pressing the * key, on a Baofeng UV-5R, using Chirp 0.4.0.  Enabling Dual
> Watch doesn't seem to do it.
> Thanks
>
>
Tapping the [*SACN] key is a toggle for "reverse mode'. Taping it will
enable it (an "R" will appear in the upper status display). Tapping it
again will disable it (the "R" will disappear).

TDR doesn't affect the "reverse mode" function unless your firmware is
BFB251 or older. On these older firmwares, TDR must be set to OFF for the
"reverse mode" function to work. Other than this bug, programming software
has no control over this feature.

Jim KC9HI
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140417/75dad211/attachment-0002.html 


More information about the chirp_users mailing list