[chirp_users] VX 170 programming
thecanesvenatici at gmail.com
Thu Apr 17 13:32:36 PDT 2014
Download the generic Prolific cable driver package. Read the top of the
page how to instal unsigned packages. This
is for OSX Lion and later. I use it with Mavericks. I assume you are using
OSX because of the port location.
I know this driver works, it just fixed another OSX use up a day or two
ago. And read the MacOS Tips page, you'll
get it sorted out.
On Thu, Apr 17, 2014 at 3:17 PM, Roberto Gomez <robertogomez678 at yahoo.ca>wrote:
> I’m trying to connect a VX 170 to CHIRP using the latest daily build.
> I’m using this port: /dev/cu.PL2303-00001004
> Vendor: Yaesu
> Model: VX 170
> I connect the cable with radio off, switch on with moni button held, put
> radio into Clone mode then press F key, hit OK button on CHIRP then press
> and hold the PTT until I get TX message on radio.
> All I get is “ Failed to communicate with radio: Failed to read header (0)
> Am I missing a driver or something? Some missed step? Thanks for the help.
> I’ve had good luck with Wouxun radios, working well.
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the chirp_users